I need a screw so bad....

[peter2772000]

For my scope, that is

I have an original Colt scope for my AR-15. After going thru about 20 catridges trying to set the scope sights, I realized that the screws holding the scope body to the OEM handle mount were loose. And one screw was missing.

Anyone know where i can pick up a screw?

 

[win22]

Try Western Gun Parts, I believe there in Edmonton. I don't have there number, but I bought some hard to get early Win. screws about 8 yrs. ago! Cheers

 

[peter2772000]

Thanks!

 

[PerversPépère]

Standard thread.

No need to go after the gunparts stores, that screw is probably standard thread.
Shouldn't be difficult to measure and find a proper screw.
Take another one off and go see your nearest tool and fasteners store; I'm pretty sure they can find the exact match. You might even find hex or Torx tool grade cap screws.
Then Blue Loctite them...
Good luck.
PP.

 

[RifleDude]

IIRC, these scopes were made by Hakko and will most likely be metric. Take the other screw out and see if you can find a matching screw at your local machine shop. You may have to cut it to length. You can blacken an uncoated steel screw by heating it up to a blue colour and dipping it in oil. Good luck!

 

[peter2772000]

Great idea, guys. I'll pop off one of the other screws and go hunting at Home Depot today