Is Jim Korth still the place to send sick Leupold scopes?

[popcan]

I have the address, in Okotoks, if that is still current....

First ever Leupold that has needed something.... so I am a virgin when it comes to sending a sick scope out for repair..... be gentle!

 

[Fassteel]

I have the address, in Okotoks, if that is still current....

First ever Leupold that has needed something.... so I am a virgin when it comes to sending a sick scope out for repair..... be gentle!

Well with all the Bushnell bashing that takes place, it is nice to hear some one has a problem with a Leupold....... Yes still in Okotoks
I'm pretty sure you won't have to wait 6 months for your repair. FS

 

[popcan]

Well with all the Bushnell bashing that takes place, it is nice to hear some one has a problem with a Leupold....... Yes still in Okotoks
I'm pretty sure you won't have to wait 6 months for your repair. FS

I mostly have Leupolds and Zeiss Conquests...so I don't know about Bushnell bashing.... however, I have recently bought a couple of those to try as well... but as yet nothing has gone wrong with either. They seem like a decent scope for the money so far.

If you don't try to expect them to perform like a Leupold or Zeiss, it's all good.

 

[evan the cdn]

Yup, that's were I sent my Leupold to have the parallax adjusted. He was fast cheap and did excellent work.

 

[manitou210]

Friends old 1.5 to 4x Leupold lost one of adjustment caps emailed Korth, 4 days from Alberta to Ottawa 2 new caps N/C pretty fine service. and the price was sure nice.

 

[blasted_saber]

I just mailed my scope out tuesday, regular mail (about 7 days expected). I'll update when I get it back.

 

[srt4u2nv]

Does this place do "custom shop" work too?.........

 

[tripalm]

Does this place do "custom shop" work too?.........

yes

 

[P of PDent]

Does this place do "custom shop" work too?.........

Yes, to some degree. Call Korth Group (403) 938-3255 and ask for Tony Gauthier (he is also a member on this site). Phil.

 

[Tony Gauthier]

Does this place do "custom shop" work too?.........

What kind of work did you want done?

 

[popcan]

What kind of work did you want done?

Tony, I have sent you a pm re: a scope I am forwarding to you.

No custom work on this one, thanks.

 

[KDX]

I'm going to be sending my VXII in soon because the power ring has been really stiff since I bought it new. An awesome scope otherwise.

 

[Brocolt]

What kind of work did you want done?

Tony I have a few questions for you, 1 question I will post here the other I would like to PM or on are you ok with the PM part?

first question, if I buy a VXII over the counter can I get M1 Target knobs made for it?

the other I would like to talk to you in private..

 

[Tony Gauthier]

Yes M1 will go on a VX 2 but you need target adjustments as well. PM is fine.

 

[Tony Gauthier]

I'm going to be sending my VXII in soon because the power ring has been really stiff since I bought it new. An awesome scope otherwise.

Please guys - Remove the rings and lens covers. Getting too hard to keep track of extra pieces and I am pretty busy with custom work. It will speed things up considerably!!!!

 

[srt4u2nv]

What kind of work did you want done?

I have a VX-L 3.5-10x56mm it has a duplex reticle and I would like to change it to the B&C or Varmint hunters reticle......I would also be interested if the BDC/CDS dials could be installed on this scope.

 

[Tony Gauthier]

I have a VX-L 3.5-10x56mm it has a duplex reticle and I would like to change it to the B&C or Varmint hunters reticle......I would also be interested if the BDC/CDS dials could be installed on this scope.

The VXL and VX3L long range models are not scopes that can have reticle changes done on them. The front lens must come out to get the system in and out and that can only be done on the assembly line. Would be quite expensive to do. Dials are no problem if you want target dials. I have not been able to get some of the CDS adjustments for the LR scopes. May have some for the VX-L 3.5 x 10. Call me at 403-938-3255 during the day and I will look up the part number and check my stock.