I picked up this Winchester 101 over and under, I'm looking for some guidance and understanding what is going on.
There are two problems only one of the ejectors is firing the lower.
The selector switch seems to have mind of it's own plus its not firing in the correct order.
I think I've pinpointed the problem but need to understand why it's happening.
So in the two videos below you will see the action open and the hammers move back, the one hammer always locks in place the second hammer which I'm thinking is why the selector is not working correctly and its firing barrels erratically does not lock back into place. As you can see when I move it back ever so slightly it does end up locking in place. Maybe its not supposed to do this. Someone with some experience on this platform could let me know.
The second issue the lower ejector is not operating. I'm guessing its due to this ejector rod being deformed but again could someone chime in here and let me know what I should be inspecting.
There are two problems only one of the ejectors is firing the lower.
The selector switch seems to have mind of it's own plus its not firing in the correct order.
I think I've pinpointed the problem but need to understand why it's happening.
So in the two videos below you will see the action open and the hammers move back, the one hammer always locks in place the second hammer which I'm thinking is why the selector is not working correctly and its firing barrels erratically does not lock back into place. As you can see when I move it back ever so slightly it does end up locking in place. Maybe its not supposed to do this. Someone with some experience on this platform could let me know.
The second issue the lower ejector is not operating. I'm guessing its due to this ejector rod being deformed but again could someone chime in here and let me know what I should be inspecting.
