IWA 2017: Fenix Ruike Folding Tanto

greentips

greentips

Administrator
Moderating Team
Rating - 100%
261   0   0
Location
Pluton
Here is the thread of products and pictures. Before more gun stuff, something different:

The yet to be named and unofficially showcased Fenix USB chargeable light and speaker "lego" combo. Perfect for camping or small places. They are actually asking for name suggestions:

32600460614_357bb6659e_b.jpg


33402865896_c55bd3b132_b.jpg


I don't know Fenix makes knife, under a different brand name Ruike. This knife is said to be about 40 USD that comes with a 5 years warranty and life time repair. The blade is SS 14C28N. Liner lock.

33402865726_9f7d03cb02_b.jpg


32600460294_a608006183_b.jpg


More to come....
 
Last edited:
I thought at first that this was a switchblade but that sliding button on the side of the grip is to lock the blade open.

The site says "Ruike" is pronounced "Rake". Now is "Rake" pronounced like our "rake" or "rahkee"?
 
Kveldulf said:
I thought at first that this was a switchblade but that sliding button on the side of the grip is to lock the blade open.
Click to expand...

not exactly..that is a variation of a Hinderer lock bar stablizer invented by custom knifemaker Rick Hinderer...the knife is actually a framelock (not liner lock) and that button prevents the lockbar from bending in the wrong direction if put under stress.

per his website:

The Hinderer Lock Bar Stabilizer is an over travel stop, meaning it prevents the accidental over travel of the lock bar during closing of the knife. When designing the Lock Bar Stabilizer the problem I wanted to correct concerning over travel is the complete over springing of the lock bar thereby rendering the knife useless. I am firefighter as a lot of you know…while working at an accident scene I was using one of my Firetac’s to cut the upholstery material around a seat post prior to using the jaws to cut the post…being that it was a devastating wreck, and my adrenalin was running high, not to mention the fact that I was wearing heavy gloves, I pushed the lock bar way to hard thereby springing it, and of course the blade could no longer lock, not a good thing to happen, especially at that time! I knew then I needed to do something about it…The other issue I wanted to address was the lock bar springing towards the back of the knife when gripping it. Sometimes the movement in the lock bar is not really noticeable when using the knife under normal conditions, but when you use the knife really hard, and grip it hard you WILL move the lock bar. This is because to make a frame lock or liner lock knife you have to cut the long slot in the frame or liner to create the lock bar, it does not matter what size slot you cut you will still have material missing there…simple physics suggests that you have a lever and it will move toward the back of the knife…guaranteed…now, what does this mean…1, whenever you have movement in a mechanism it is a chance for that mechanism to fail..2,extra movement in the lock to blade joint will wear the lock face quicker…3,when the blade is locked up on a frame lock with the lock bar stabilizer there will be absolutely no movement in the lock….
 
You must log in or register to reply here.
Back
Top Bottom