K31 bipod adapter- no alterations needed.

NB.nagantsniper said:
is this able to fit on earlier swiss rifle /1911 ??
Click to expand...

I just tried it on a K11. Only major problem is that you can't use the original front action M6x1.0x25 action screw(half threaded), too short to engage the threads.
U-channel pad might need slight compression to make it slightly tighter.

I'll need to borrow someone's M1911 to see how that fits. Should be the same for the action screw, but would like to check the padded U-channel to stock fit

No go on M1889, magazine rib to large to allow screw to enter bi-pod adapter.
 
On K11

P1010382.jpg


Used a M6x1.00x35mm SHCS. I had to reduce socket head diameter by .030"

Yoke will have to be adjusted slightly for width and upward pressure.
 
You're killing me with all these modifications man..... I can't afford another rifle....but the outfitted k31 with all the accessories that don't need any modification.....
 
You must log in or register to reply here.
Back
Top Bottom