Kel Tec Sub 2000 lock ?

[ben777lemay]

Hey guys, I recently bought a Kel Tec Sub2000 ( Glock mags in 9mm ).

I would like to carry and store it in a soft bag and I was wondering if there’s a way to lock it ?
Is there a special lock made for this gun ?

A wire lock will work ( thru the ejection port and magwell ) but I would like to see what you guys use as locks…

 

[bugs]

these are non restricted so no lock needed when transporting

 

[thegazelle]

I use an Axiom combination cable lock, in exactly the way you state.

 

[ben777lemay]

these are non restricted so no lock needed when transporting

I updated my original post…

I’d like to carry and store it in a soft case.

 

[ben777lemay]

I use an Axiom combination cable lock, in exactly the way you state.

What lenght are you using ? I can see they are made in different length.

 

[thegazelle]

What lenght are you using ? I can see they are made in different length.

Mine is the 30cm longer version.

 

[Canuck44]

I updated my original post…

I’d like to carry and store it in a soft case.

OK, so why do you need a lock? If you have small children I would be locking mine up in a gun safe or locked closet.

Take Care

Bob

 

[maifire]

Able to Lock the case?

 

[City Boy]

Gen 1 has a lock built into it where you can lock it so it stays folded and thus unable to fire. I thought gen2 had a similar lock built in.

 

[Can-down]

You could just wrap the combo cable lock around the folded gun so it can't be unfolded instead of bothering running it through the action.

 

[Can-down]

In the past I've made locking straps for lever action rifles using plumbing strap cut to length and rounded with snips, then filed to remove any sharp edges and wrapped in electrical tape.

I wrap the strap around the lever and the stock and then lock it with a basic small combination lock. Same thing could be done with the sub2000 and it's cheap if you have snips, files. electrical tape and plumbing strap in your shop.

 

[ben777lemay]

Gen 1 has a lock built into it where you can lock it so it stays folded and thus unable to fire. I thought gen2 had a similar lock built in.

I will give a second look…

You could just wrap the combo cable lock around the folded gun so it can't be unfolded instead of bothering running it through the action.

With a shirt cable it may work !

In the past I've made locking straps for lever action rifles using plumbing strap cut to length and rounded with snips, then filed to remove any sharp edges and wrapped in electrical tape.

I wrap the strap around the lever and the stock and then lock it with a basic small combination lock. Same thing could be done with the sub2000 and it's cheap if you have snips, files. electrical tape and plumbing strap in your shop.

Another option, thanks !

 

[Can-down]

With a shirt cable it may work !

Just wrap it around a few more times if you have a longer combo cable.....

 

[City Boy]

The gen one lock doesn’t look like a traditional lock and needs a spiral looking thing for the key.