L/F tear down instruction for sig 226 or Norc Np22
- Thread starter tufenuf
- Start date
How far do you want to tear down the pistol? I can lead you through the basic tear down for cleaning purposes if you want to PM me.
How to field- strip (disassemble) P226:
1) remove the magazine by pressing the magazine release button;
2) check that the chamber is empty;
3) pull the slide all the way back and lock it there with the slide stop;
4) rotate down the disassembly lever, which is located at the left side of the frame, above the trigger;
5) release the slide and carefully push it forward, and out of the frame;
6) remove the return spring assembly from below the barrel;
7) remove the barrel from the slide.
Reassemble in reverse order.
1) remove the magazine by pressing the magazine release button;
2) check that the chamber is empty;
3) pull the slide all the way back and lock it there with the slide stop;
4) rotate down the disassembly lever, which is located at the left side of the frame, above the trigger;
5) release the slide and carefully push it forward, and out of the frame;
6) remove the return spring assembly from below the barrel;
7) remove the barrel from the slide.
Reassemble in reverse order.
Busta Capp
CGN frequent flyer
- Location
- Town of the Blue Mountains (ON)
- Location
- Montreal, Quebec
Here, this should be of help:
http://stevespages.com/pdf/sig_p220to245.pdf
http://stevespages.com/pdf/sig_p220to245.pdf
