LakeField markll

257wbycustom

257wbycustom

Regular
Rating - 100%
2   0   0
Location
No tellycreek B.C.
I have a lakfield mark ll it wont shoot winchester super x ammo Shoots blazers no problem,I examined the rim it's leaving a good pin mark...The bolt has the round pin instead of the sqaure dont know if this makes a difference also noticed the thicknes of the blazers has a little more meat around the rim than the winchester...Any one ever run into this problem?
 
By "won't shoot" do you mean you're experiencing a failure to fire? Ammo pickiness shouldn't come into play there. Try flushing out the firing pin with cleaner. Maybe it's giving light strikes that the Blazer is okay with but isn't hard enough for the Win Super-X (thicker cases maybe?). The Lakefield is #### on open so you can also try lifting the bolt and back a bit to re-#### it and see if a second strike sets them off, but try cleaning the bolt internals first.
 
Lock_Time said:
By "won't shoot" do you mean you're experiencing a failure to fire? Ammo pickiness shouldn't come into play there. Try flushing out the firing pin with cleaner. Maybe it's giving light strikes that the Blazer is okay with but isn't hard enough for the Win Super-X (thicker cases maybe?). The Lakefield is #### on open so you can also try lifting the bolt and back a bit to re-#### it and see if a second strike sets them off, but try cleaning the bolt internals first.
Click to expand...
Missfire on the super x did the second strike re-#### nothing,how does the bolt come apart to give it a cleaning...
 
You must log in or register to reply here.
Back
Top Bottom