Lead in the 32 Spec.

[chuckwagon]

I just got a Win 94 in 32 Spec. I would like to get a bullet mold for it. Just wanted to know what others use. Has anyone used the Lee 8mm mold? It should cast bullets around 323.

 

[stocker]

If you are going to load shells in the magazine you want bullets with a flat nose . Not sure if the mould you are referring to has that or not. I use an RCBS 32-170 FNGC mould. It drops bullets at .323 for me and I lube and install checks using a .323 sizer die. Bullets weigh slightly over 180 grains finished using 1/20 alloy and shoot very well without hardening to 2000FPS with good lube.