ok so i want to get the glock 22 in 40 s&w and i have heard of the cases bulging n ppl reusing them not noticing n then screwing up the glock by making dicks fall off. so i was wondering if anyone has used the lee percisions bulge buster its supposed to recondition the brass ... comments?
lee bulge buster
- Thread starter misfits
- Start date
No it doesn't.
Read the instructions.
The Bulge buster kit is about $19 US.
The Lee FCD is about $23US.
easyrider604
CGN Ultra frequent flyer
- Location
- Greater Vancouver, BC
You can get the Lee 40 caliber 4-die set. It includes the FCD.
Lee makes a 3-die set that does not include the FCD.
These four dies are all I use for now, and all the range brass I use for reloading have no problems feeding and chambering in my cheapo Norinco NP58. Some of my range brass have the ugly bulge as well.
Your pistol may behave differently.
IMO, you may delay purchase of the Bulge Buster until you determine you have failure to chamber problems. Or if 20 bucks is nothing to you, then go ahead and order the bulge buster when you order your 4-die set.
Lee makes a 3-die set that does not include the FCD.
These four dies are all I use for now, and all the range brass I use for reloading have no problems feeding and chambering in my cheapo Norinco NP58. Some of my range brass have the ugly bulge as well.
Your pistol may behave differently.
IMO, you may delay purchase of the Bulge Buster until you determine you have failure to chamber problems. Or if 20 bucks is nothing to you, then go ahead and order the bulge buster when you order your 4-die set.
