Lee Enfield scope mount

[prolifik]

I purchased a no4 mk1 on a synthetic stock from a fellow member a while back and it came with a scope mount screwed to it. The only markings on it are T01. When I Google it all I find is a weaver mount for the same rifle. Mine isn't a weaver style mount. It's not as wide and has a much different edge to it. Does anyone know what I'm talking about or what rings would fit it?

 

[englishman_ca]

Weaver TO1 rail uses Weaver Tip-Off rings which are smaller than the usual Weaver rings of which you are thinking.

Tip-Off rings are of a size for a rail (3/4inch, 19mm) usually used on 22 rimfire rifles. They work fine for 303 but they must be kept tight.

 

[MD]

I have that mount too. Bought the only rings I could find for them and they are see-through mounts and the scope ended up mounted way too high to easily see through. I had to improvise a cheek pad out of an old wool sock stuffed with more socks.

 

[prolifik]

Thank you

 

[Ganderite]

Scope rings are made to fit that base. I have bought both 1" rings and 30mm rings to fit, in any height you want.

Try ebay.

 

[SHELL SHUCKER]

I have that mount too. Bought the only rings I could find for them and they are see-through mounts and the scope ended up mounted way too high to easily see through. I had to improvise a cheek pad out of an old wool sock stuffed with more socks.

Weird that ye couldn't find the right set of Weaver tip off rings fer the bugger. I mounted a Bushnell 2-7 Elite on me LE .32-40 squirrel bomber using the TO-1 base (That I trimmed) & low Weaver rings. A hint of Loctite blue keeps everything snug.

 

[MD]

Well, that's what happened. I went to my favourite reliable gun shop and that was all that was available.

Weird that ye couldn't find the right set of Weaver tip off rings fer the bugger. I mounted a Bushnell 2-7 Elite on me LE .32-40 squirrel bomber using the TO-1 base (That I trimmed) & low Weaver rings. A hint of Loctite blue keeps everything snug.
View attachment 284468