Lenght of the pillars for savage 110

[PaulT]

Hi,

Might be a dumb question but here it goes...

Anyone knows the required lenght of the pillars for a Savage 110E in 308 ?(wood stock, not synthetic)

Thanks

 

[Gibbs505]

Measure it?

 

[PaulT]

Measure it?

Well .... that helped .

If I buy a pillar kit for a Savage 110, the pillars will be precut no? So this is the mesure I need, what lenght do they send in their kit?

Thanks anyways

 

[gunasauras]

Not sure what length they send in their kits, but you will have to adjust the length to suit the stock/bedding/action combination you are using.....

 

[PaulT]

Not sure what length they send in their kits, but you will have to adjust the length to suit the stock/bedding/action combination you are using.....

So, the pillars are not made to a specific lenght, I thought they had to be made of differents lenght depending of rifle, when looking at the kits, Rem kit looks different from Winchester or Savage. Didn't know it needed to be filed or grinded to fit, thought it was standard pre cut to the right lenght depending of the rifles model, then drill the hole, fill with bedding compound and tighten.

Thanks

 

[gunasauras]

So, the pillars are not made to a specific lenght, I thought they had to be made of differents lenght depending of rifle, when looking at the kits, Rem kit looks different from Winchester or Savage. Didn't know it needed to be filed or grinded to fit, thought it was standard pre cut to the right lenght depending of the rifles model, then drill the hole, fill with bedding compound and tighten.

Thanks

You are correct, they are made to length for different rifles, but they may need to be shortened slightly depending on your application....

 

[gunpro]

Brownell's carries a set of adjustable units. of course they cost more, never used them so can't comment either.