Let me see your NRL Hunter rigs!!

First question, is there a NRL Hunter match near you or will you be attending one? No point building a rifle for a discipline that pretty much doesn't exist in Canada.
 
Last edited:
Defiance Classic
International Barrels Carbon Tac - 24” 1/8 Twist
MDT Crbn Stock w/ Precision Bottom Metal
Without Warning CHAD Light
Leupold Mark 4HD
Hawkins Ultra Light Rings

Hammers with 144gr Berger lrht in Alpha brass, 40.9 grains of h4350.
 

Attachments

  • IMG_8804.jpeg
    IMG_8804.jpeg
    117.4 KB · Views: 113
  • IMG_8803.jpeg
    IMG_8803.jpeg
    91.7 KB · Views: 113
  • IMG_8825.jpeg
    IMG_8825.jpeg
    92.8 KB · Views: 113
6 GT - edit

c. There is no minimum Power Factor (PF) for the Factory division, however the Factory Division hunter's PF will be used in the case of a tiebreaker. Factory rifles chambered in 6mm/.243 or greater, with a cartridge overall length of 2.700” or greater (per SAAMI-ANSI Max cartridge length standards), with a maximum muzzle velocity of 3275, will be allowed only in the Factory Division.

comes up short it seems

Open Light Division
With a Muzzle Velocity maximum of 3275 fps 6mm with 115gr will not be able to make the minimum PF.
 
If not shooting factory yes. The lowest calibre that can be used in NRL is 25 cals. The 25x47 or 25 Creedmoor are popular options. Buuuuuut your on the raged edge of power factor.
 
Defiance Classic
International Barrels Carbon Tac - 24” 1/8 Twist
MDT Crbn Stock w/ Precision Bottom Metal
Without Warning CHAD Light
Leupold Mark 4HD
Hawkins Ultra Light Rings

Hammers with 144gr Berger lrht in Alpha brass, 40.9 grains of h4350.
Beautiful rig

How heavy is it coming in at ?
 
Won this Defiance anti-x in the first year of the willow creek washout. 20 dollars got you 5 shots at 1 mile. Four people hit the target, I was lucky enough to get my ticket drawn
24" ibi carbon hunter 1 in 8"
Chambered it in 6.5x280AI
Sends 140 gr bergers at 3100. 58 gr of h4831sc, slightest ejector mark on brass. Will drop it a grain to lose that.
Nightforce atacr 4-16
MDT hnt 26
Timney
3 gill brake
Didn't have the triple pull at the shoot this year. Would have done better if I did.
Weighed in at the shoot at 10.5 lbs
 

Attachments

  • 20250523_131916.jpg
    20250523_131916.jpg
    247.8 KB · Views: 47
  • 20260104_085005.jpg
    20260104_085005.jpg
    167.9 KB · Views: 47
Not sure if we will have NRL comps in our country but experimenting with a rifle anyway. As is she will make the open light weight limit easily. Stock only 800gr ~28oz and 20" Carbon barrel. Power factor with the 6.5CM is on the limit and a 24-26" barrel would help which would be easy to change.

Plinking rocks at 1050yds

yrHJymM.jpg


5mc7gnQ.jpg


edi
 
Not sure if we will have NRL comps in our country but experimenting with a rifle anyway. As is she will make the open light weight limit easily. Stock only 800gr ~28oz and 20" Carbon barrel. Power factor with the 6.5CM is on the limit and a 24-26" barrel would help which would be easy to change.

Plinking rocks at 1050yds

yrHJymM.jpg


5mc7gnQ.jpg


edi
Very nice! what stock is that?
 
Schmidt & Bender guys came over to us with their new Meta scopes in FFP which are strongly directed to NRL. Two reticles choices that are both very useable. Scope is much lighter than most PRS type scopes and also only use 42mm Objective. In many cases the weight saving is not needed however I also think we will either see an additional lower weight class or the trend might go to using heavier longer barrels saving weight in optics and stocks. A tendency also seen in FTR.
The left T3 rifle has a 22" Proof Sendero Carbon Barrel in 6.5CM weighing around 3kg with the 700 gram stock. Arca rail is from Salmon River Solutions and very light. With the Meta weighing under 800grams one would have a good margin to fit a heavier longer conventional match barrel to make up the weight limit.

VCaMBGr.jpg


edi
 
Here's my current rig, needs a new barrel now.

Photo 2026-01-16, 11 10 36 PM.jpg

Photo 2025-05-14, 11 06 50 AM (1).jpg

26" Proof 6.5 Creed chambered by Insite with Insite Heathen (now has MDT hunt brake)
Defiance Elite with TT Special 2-stage
MDT CRBN and modded triple-pull Ckyepod (lightweight Ckyepod head/gen 2 triple pull legs, now has gen 3 triple-pull)
Vortex Razor LHT 4.5-22 in Vortex rings with offset Vortex Venom rds and Impact 4000

a hair under 16lbs
 
Back
Top Bottom