Let's see your cut downs

YoungGunz67

YoungGunz67

Regular
EE Expired
Rating - 100%
6   0   0
Location
Under a rock in sw Ontario
Let's see your cut down sawed of shotguns(legal length only) stocks count to
No "factory sawed off or cut down" this is the DIY short shotgun thread not "the I went to the store and bought this" Will post pics of mine later
 
Last edited:
I don't know what you mean by "wanna-be" factory "sawed-off's". If it isn't manufactured as a SBS, then your only other LEGAL option is to buy an aftermarket barrel and install it yourself. There's a thread stickied at the top of this forum that have plenty of SBS's posted there. If you're not looking for factory guns in this thread you might not get the response you're looking for as they're fairly well represented here.
 
YoungGunz67 said:
im not talking about these wanna be factory made "sawed off's" im talking about the real macoy that you or a previous owner did.not just barrel cut downs ether stocks to.just keep it legal.i will post pics of mine later today.

cheers to the lovers of the old way

young gunz
Click to expand...


Ah, the dreaded sausage finger samsung keyboard strikes again!! I have to proof read what I type, to check for unintended periods everywhere.
 
2bad4u2 said:
I don't know what you mean by "wanna-be" factory "sawed-off's". If it isn't manufactured as a SBS, then your only other LEGAL option is to buy an aftermarket barrel and install it yourself. There's a thread stickied at the top of this forum that have plenty of SBS's posted there. If you're not looking for factory guns in this thread you might not get the response you're looking for as they're fairly well represented here.
Click to expand...

If you have the tools,time and knowledge you can cut down any shotgun(minus semi's) down to 18.5" barrel and 26" OAL
Which some people including me on here use the for bear guns and camp guns.
Cheaper that way or "budget tactical"
 
You can cut down any shotgun(minus semi's) down to 18.5" barrel [legal length] I use my Moss 500 for birdshot and 00 buck [coyotes]. Fitted with three point sling for carry you are prepared for anything. Some people including me like YoungGunz67 on here use this set-up for bear guns and camp guns.
 
YoungGunz67 said:
If you have the tools,time and knowledge you can cut down any shotgun(minus semi's) down to 18.5" barrel and 26" OAL
Which some people including me on here use the for bear guns and camp guns.
Cheaper that way or "budget tactical"
Click to expand...

Thanks. I'm fully aware of that. Your "sawed-off" comment confused me as it is typically associated with prohibited firearms.
 
Before and after 1974 wingmaster

thread here http://www.canadiangunnutz.com/forum/showthread.php/1158057-Wingmaster-870-barrel-chop


1924902_10152911547018552_8315911432309014563_n.jpg


10461955_10152932193223552_6532650520628772215_n.jpg
 
Don Fox said:
You can cut down any shotgun(minus semi's) down to 18.5" barrel [legal length] I use my Moss 500 for birdshot and 00 buck [coyotes]. Fitted with three point sling for carry you are prepared for anything. Some people including me like YoungGunz67 on here use this set-up for bear guns and camp guns.
Click to expand...

What would stop you from cutting down a barrel to 18.5" on a semi-auto? It's completely legal to do. You can cut down manual action centerfire barrels to 18.0" and be within legal limits.
 
image_zpsfd3d6ef5.jpg.html


Mine, a SxS 12 gauge bastard gun it's made from 3 different SxS parts guns bastardized to work an it works well. The ends of the 30" barrels had rusted to nothing down to about 22" so I though alright I always wanted a 18.5 barrelled coach gun with the pistol grip it's 28" OVAL
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom