Level III+ .556 Hybrid Hard Armor 10x12 plates and Level IV Hard armor just arrived

badboybeeson

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97.2%
611   18   5
Location
East ontario
Level III+ .556 Hybrid Hard Armor 1.9kg each 10x12 inch
Level IV Hard armor 3.0kg ea 10x12 inch
Level III soft armor 0.250 ea 10x12 inch
Level III soft armor 0.180 ea 6x6 inch

Most of these will be shipped out to dealers by the end of the week, contact us for a dealer near you

see attached link for more details or contact one of our dealers

http://sjhardware.com/store/modules.php?name=catalog&file=index&cPath=150

* Just a little update on the hard armor products, which may have been missed.
Our plates are SAP "Stand alone Plate", not IC "in conjuction" you do not need any other soft armour under these plates to rate them as level 3 or level 4 plates.
This is very important to understand, as for example if youbuy a level 4 “IC” in conjunction plate, it must be use with Level 3a or level 3 soft armor, or the back face trauma may be enough to cause major injury or death if the plate is struck with ammunition that the plate is not rated for.


level_4_plate.jpg

 
Last edited:
From now until the end of the month free shipping in canada on a set of hard armor or soft armour plates
a $30 to $50 value
we have limited stock of L3 andl4 hard plates so dont wait.
bbb
 
* Just a little update on the hard armor products, which may have been missed.
Our plates are SAP "Stand alone Plate", not IC "in conjuction" you do not need any other soft armour under these plates to rate them as level 3 or level 4 plates.
This is very important to understand, as for example if youbuy a level 4 “IC” in conjunction plate, it must be use with Level 3a or level 3 soft armor, or the back face trauma may be enough to cause major injury or death if the plate is struck with ammunition that the plate is not rated for.
 
Hey bbb I am definatly interested but it doesn't say on here or on the website where the plates were made. are the lvl III+556 made in Canada?
 
mini_cal said:
will the hybrid plates crack if dropped? Similar to the Dyneema? Or still standard run of the mill ceramic plate?
Click to expand...

No very unlikely.
The hybrid plates are a combo of kevlar, dyneema, uhmw, and a small thin Aluma/ceramic insert to break up the bullet, unlike the standard cerimic plates , they are able to be dropped with much less, to very little chance to being damaged.
 
Last edited:
How were these rated? By NIJ itself or a third party?
Country of origin??
Also, will they will fit a BFG LMAC large?
 
You must log in or register to reply here.
Back
Top Bottom