LF: Set of tiny Torx bits

CanAm

CanAm

Canada Ammo - CGN Sponsor
Rating - 99.7%
324   1   0
Location
Vancouver, BC
Anyone know of a set of those tiny Torx bits used on cell phones, knives, grips, etc. The small ones are something like 1mm diameter.
 
Bought a good quality set at KBC tools on Annacis Island. Can't remember the exact price but it wasn't too expensive. I do not reccomend buying cheap crap. They will only give you headaches.
 
The Princess Auto set (the bigger one in the orange case) is actually really good. The bits are tempered well, I've used the tiny flatheads to break off security torx pins and the bit didn't even bend. Think it was 10-15 bux. Man, I miss princess auto, we need one on the island bad.
 
CanAm said:
Anyone know of a set of those tiny Torx bits used on cell phones, knives, grips, etc. The small ones are something like 1mm diameter.
Click to expand...

I think they are size 6, and I think I bought a bit at Canadian Tire... for dismantling a pocket knife that used small torques screw. In these smallest sizes quality isn't a big deal, you can not twist such a small thread with much force to start with.
 
maddisons(addisons) are 2 affiliated electronics stores in montreal east and laval. they have a s**t load of those torx bits for .50 cents each.from really small to really big.if you need i can get some for you...
 
Yah, those sets at the auto shop places don't ggo small enough. The torx sizes I need or super tiny, they almost look like sharpedned points until you look closely.

Thanks for the tips.

Chris
 
CanAm said:
Yah, those sets at the auto shop places don't ggo small enough. The torx sizes I need or super tiny, they almost look like sharpedned points until you look closely.

Thanks for the tips.

Chris
Click to expand...

They do, I have a set that's been around for about 22 years. The dealer I bought them from is now retired.
 
I bought a set of torx screw drivers from Princess Auto to do service on cell phones.

They are the tiny jeweler screw driver sizes. It is a set with one handle, and 8 or so double ended bits. They do phillips as well.
 
MRO Electronics
1745 Boundary Rd.
Vancouver, British Columbia, Canada.V5M 3Y7
Bus: (604) 298-4941
Fax: (604) 298-4945
Toll Free: 1-866-298-4941

Call them, and they will have what you need. Good supplier for all sorts of electronics tools at reasonable prices.
 
CDN Tire have a "Precision" set, which uses interchangable bits, and they are down to T1 IIRC, it is a plastic case, clear, with about 20 or so various bits, 24.95 or so.
 
ColdOne said:
http://www.wihatools.com

In the states, however they have bits all the way down to T3 size, roughly 1.3mm in dia.
Click to expand...

:D :D

MRO is a WIHA dealer. I have had a set of their adjustment tools for almost 10 years, and they are some of the best I have ever used.:dancingbanana:
 
CanAm said:
Anyone know of a set of those tiny Torx bits used on cell phones, knives, grips, etc. The small ones are something like 1mm diameter.
Click to expand...

Midland liquidator on Kingsway west of Knight has Torx on sale as a set of 5 mini bits for about $4. Bought a set for my ZT Knife just a couple of months ago. best deal on tools in the city.

LH
 
You must log in or register to reply here.
Back
Top Bottom