load for a 30-06

[reese]

Anyone out there in reloader land have a pet load for a tika t3 lite in 30-06. I plan on shooting TSX's. Relaoder 19 and IMR 4350 seems to be a good starting point.

165 gr.

 

[JasonYuke]

what wieght of bullet, I will always say start with 4064 with the 30-06 from 165s to 180s.

The other 2 powders you mentioned i could never get to dial in in any of my 30-06s

 

[Steeleco]

57 grn of IMR 4350 seems to be a common load for the .06 I use it for both 165 grn and 189 grn bullets

 

[manitou210]

Start out 59gr RL 19 work up slow, I had some 168gr Sierra's that used and then loaded with 165gr Acubonds for hunting, I was using Win brass, neckturned,and only neck sized them, Fed GM primers
Gun was a older rem 700 BDL from 70s I had mostly used H414 & IMR 4350 for 30.06 which worked well, but could never get groups as tight as the RL19 could.
at 300 yards I got just over the inch with 168gr and 2" with the Accubonds
and this at 100
http://

 

[Mad_Mikee]

I use 55g of H4350 with the 168g TSX and federal 210m primers

 

[todbartell]

I was using both H4350 and RL19 last year in my 30-06 with 165 grain Accubonds. 57.5 grs H4350 for 2815 fps (24" tube) & 62.0 grs RL19 for 2840 fps. Both loads shot 3/4" 3 shots.

reduce 5% and work up slow I wouldnt go past 2900 fps