Load for win 1895 30Govt06

G

gb5084

New member
Rating - 100%
31   0   0
Location
Ancaster Ontario
Hello all,
Looking for load suggestions for my Win 1895 30 Govt 06
It is a first generation second model (not flatside) made in 1928.
All books I have don't give pressures. I have imr 3031 and imr 4198, would get what I need though. Have 180 gr hornady SST but would also like lighter loads.

Mucho appreciated
 
The 95s are very strong actions. They will take any load that suits the O3 Springfield as far as military loads go and more.

I used to load mine with 200 grain bullets with 56 grains of H4831 over CCI250 primers. Mine had a long throat so the loaded length was as long as the magazine would handle.

I later went to 180 grain Spire Point bullets with 58 grains of H4831 over CCI250 primers because my rifle shot them more accurately.

There were never any pressure signs. Likely because of all the freebore.
 
Nothing for 4198 in 30-06.

Warning! Notes: Case: Winchester; twist: 1:10"; primer: Winchester LR, Large Rifle; barrel length: 24"; trim length: 2.484"; bullet diam.: .308".
Be Alert: Publisher cannot be responsible for errors in published load data.
Wt. Bullet Powder Manufacturer Powder Charge Velocity (FPS) Favorite?
110 Hornady SP IMR IMR-3031 51.0 3252
Remarks: start load; COL: 3.170"; 47,200 psi
110 Hornady SP IMR IMR-3031 54.9 3471
Remarks: max load; COL: 3.170"; 57,800 psi

125 Sierra SP IMR IMR-3031 49.0 3091
Remarks: start load; COL: 3.150"; 47,100 psi
125 Sierra SP IMR IMR-3031 52.8 3298
Remarks: max load; COL: 3.150"; 58,400 psi

130 Speer HP IMR IMR-3031 47.0 3010
Remarks: start load; COL: 3.060"; 49,500 psi
130 Speer HP IMR IMR-3031 50.3 3176
Remarks: max load; COL: 3.060"; 58,300 psi

150 Nosler E-Tip IMR IMR-3031 43.0 2644
Remarks: start load; COL: 3.300"; 47,600 psi
150 Nosler E-Tip IMR IMR-3031 46.0 2811
Remarks: max load; COL: 3.300"; 56,600 psi
150 Nosler BT IMR IMR-3031 43.0 2697
Remarks: start load; COL: 3.250"; 47,600 psi
150 Nosler BT IMR IMR-3031 46.7 2887
Remarks: max load; COL: 3.250"; 59,300 psi

155 Sierra HPBT IMR IMR-3031 46.0 2779
Remarks: start load; COL: 3.225"; 47,600 psi
155 Sierra HPBT IMR IMR-3031 49.0 2944
Remarks: max load; COL: 3.225"; 58,600 psi

165 Hornady GMX IMR IMR-3031 41.0 2510
Remarks: start load; COL: 3.225"; 46,400 psi
165 Hornady GMX IMR IMR-3031 44.1 2685
Remarks: max load; COL: 3.225"; 58,100 psi
165 Sierra SPBT IMR IMR-3031 45.0 2707
Remarks: start load; COL: 3.300"; 51,000 psi
165 Sierra SPBT IMR IMR-3031 48.0 2825
Remarks: max load; COL: 3.300"; 57,500 psi
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom