LOCKHART TACTICAL 5.56 BUILDER KIT - CONVERT YOUR AR to NON-RESTRICTED

[AbHobbyist]

Gents

Are there any video's of these built rifles in action.

Would really like to see that.

Thx.

AbH

 

[Tvw]

Gents

Are there any video's of these built rifles in action.

Would really like to see that.

Thx.

AbH

Doubt any of these are builder kits, but here is a few found on YouTube.

https://youtu.be/8FwAhKo7JcI

https://youtu.be/sLhy03iF654

https://youtu.be/OXXHzejjoaQ

https://youtu.be/iNBanOe8mHE

https://youtube.com/shorts/IWxrt99X92s?feature=share

https://youtube.com/shorts/tAKBOP5-7Tc?feature=share

 

[Wiskey1]

short barrel isn't a big deal as long as you dont travel with that short barreled upper attached,

 

[fchan77]

Will this kit work with pws long strokr piston?

 

[sogone2day]

Will this kit work with pws long strokr piston?

Likely you would be the first to try it looks like it runs with a gas key on the carrier unless its a proprietary bolt as well.

 

[Morc]

Do these work with regular AR charging handles or proprietary only?
Seems like the proprietary Lockhart one is longer.

 

[androoze]

Do these work with regular AR charging handles or proprietary only?
Seems like the proprietary Lockhart one is longer.

Raven 556 is a proprietary charging handle. I think the 9mm takes standard AR (someone correct me if I'm wrong).

 

[AbHobbyist]

Doubt any of these are builder kits, but here is a few found on YouTube.

https://youtu.be/8FwAhKo7JcI

https://youtu.be/sLhy03iF654

https://youtu.be/OXXHzejjoaQ

https://youtu.be/iNBanOe8mHE

https://youtube.com/shorts/IWxrt99X92s?feature=share

https://youtube.com/shorts/tAKBOP5-7Tc?feature=share

Thx very much!!

Regards

AbH

 

[redflagmat]

Raven 556 is a proprietary charging handle. I think the 9mm takes standard AR (someone correct me if I'm wrong).

You are right

 

[Morc]

Unfortunate it's proprietary, the Lockhart AR-like charging handle is mediocre.

 

[Billnyethesigsauerguy]

Unfortunate it's proprietary, the Lockhart AR-like charging handle is mediocre.

It seems to be the Strike Industries design. https://www.strikeindustries.com/si-ar-slch.html

 

[sogone2day]

Unfortunate it's proprietary, the Lockhart AR-like charging handle is mediocre.

If someone can get a gen2 dpms one somewhere they might be able to confirm length and such as it appears its a in between length from ar10 to std ar15. I havnt had any luck sourcing one reasonably priced through import.

 

[digital.allied]

If someone can get a gen2 dpms one somewhere they might be able to confirm length and such as it appears its a in between length from ar10 to std ar15. I havnt had any luck sourcing one reasonably priced through import.

can confirm length is longer than 15 and shorter than 10

 

[sogone2day]

can confirm length is longer than 15 and shorter than 10

Do you have a measured length by chance? From tip to base of handle

 

[digital.allied]

Do you have a measured length by chance? From tip to base of handle

im seeing a very respectable (and above average) 6 5/8". whereas the 15 is about 6, if measuring apples to apples

 

[redflagmat]

im seeing a very respectable (and above average) 6 5/8". whereas the 15 is about 6, if measuring apples to apples

https://ibb.co/GWs7cbV

Like this?