Lockhart Tactical Raven Platinum Edition, .223 Wylde

Bartok5

CGN Ultra frequent flyer
Super GunNutz
Rating - 100%
308   0   0
My new Platinum edition of the Lockhart Tactical "Raven" direct-impingement, semi-automatic sporting rifle arrived today. It was in-stock at a Site sponsor and arrived one province over the same week that I ordered it. I have yet to fire the rifle (tomorrow's task), however I must admit that I am quite favourably impressed with what I have examined in detail thus far. My rifle shipped with the updated second-generation Bolt Carrier, so no worries about the cracks that manifested in the too-thin Gen 1 Carriers.

The first thing that struck me out of the box was the quality of the machining, the precise fit of the parts and the flawless Cerakote finish. The precision machining is really quite impressive, with zero evidence of chatter or other tooling marks in the aluminum and steel components. Although there are a couple of sharp edges on the Lower Receiver around the underside of the Trigger Guard, these should not present a problem if you maintain a normal grip. Failing that, a couple of quick swipes with a fine file will knock the potentially annoying sharp points off of the integral Trigger Guard. The rifle's balance is excellent, right in front of the Magazine Well with a mounted LPVO. The front end feels very lightweight, and "alive" in the hands, easily pointing towards whichever direction the rifle's muzzle is driven.

The Raven features several unique aspects that other Modern Sporting Rifles do not, including a scalable Lower Receiver with a removable Magazine Well. The removable Mag Well facilitates the use of different calibres in the Raven. You simply install the Mag Well of your calibre choosing onto the remainder of the Lower Receiver. You then bolt on the caliber-appropriate Upper Receiver and away you go! Multiple calibre options are planned to take advantage of both intermediate rifle chamberings as well as common pistol loads. Another unique aspect of the Raven is its multiple configurations and options for charging the firearm. There is Left-side charging, Right-side charging, and the conventional AR15-style top-charging handle to select from! Controls on the Platinum edition are fully ambidextrous, but are not necessarily interchangeable with standard AR15 controls due to the different contours of the Raven's Receiver set.

The "Platinum" edition of the Raven ships with a hybrid Handguard consisting of a Picatinny rail on top and MLOC slots at the 3, 6 and 9 o'clock positions. It is retained by a push-pin the same as those used to join the Upper and Lower Receivers, the Mag Well and the remainder of the Lower Receiver. The top Picatinny Rail is continuous between the Receiver and Handguard, although there is some minor rotational play in the Handguard that could affect lasers or other precision instruments. This play can be eliminated through the use of a standard AR5 Handguard which clamps to the Barrel Nut, rather than being retained by a push-pin. Note that the push-pins used to assemble and take-down the Raven are not captured and should be carefully retained in a zippered pocket when in the field.

The Gen 2 Bolt Carrier is much beefier than the breakage-prone Gen 1 Carrier. Like the Upper and Lower Receivers, the Bolt Carrier is proprietary, being longer than the standard Carrier employed in an AR15. The complete Bolt, Firing Pin, Cam Pin, etc, are compatible with the AR15 for ease of repair with readily available spare parts. As always, the Trigger-Tech 3.5lb "AR Trigger" is a very worthwhile upgrade, serving as it does to enhance the rifle's accuracy moreso than just about any other components.

Is the Lockhart Tactical Raven with the Gen 2 Bolt Carrier worth the asking price? That depends on what you expect for your hard-earned cash! At $3K (+ extras), the Raven is certainly much more expensive than otherwise comparable AR15 rifles selling for under $1K CAD. That said, the Raven does come with some extras that the bargain-priced AR15s did not include such as the aforementioned calibre quick-change capability. With bargain-priced AR15s being a moot issue in Canada for the time being, the Raven is just about the only viable DI game in town these days, alongside the horribly "fugly" JARD J-180 builder's kit. The Raven is pricey without a doubt, but this appears to be a definite case of getting what you pay for. Is the Raven a worthwhile $3K(+) rifle? Only time will tell for certain, but I am optimistic that the rifle will perform satisfactorily during live-fire testing beginning tomorrow. If the Raven performs nearly as good as it looks, I will be a very satisfied customer. Yes, it costs as much as a Restricted Bren 2, but it is still cheaper than a bunch of other options on the NR Canadian market.

I really like the concept behind the Lockhart Tactical Raven. This is about as close as we can get to an AR15 without the firearm being classed as a variant. As such, it has a definite place within any collection of modern sporting rifles. Assuming a satisfactory performance on the range, I will give the Raven a hearty "buy" recommendation. Tune in tomorrow for my range findings....

Pros:

- Build quality, fit and finish.
- Flexible design (Multi-caliber, 3x charging options)
- Lightweight and balanced, lively in the hands

Cons:

- Price ($3K+)
- Slight play in Handguard (can be replaced with a standard AR15 Handguard)
- Non-Captive Push-Pins easily lost in the field (carry spares in Pistol Grip)



20231020-174027.jpg



20231020-174047.jpg



20231020-174247.jpg



20231020-174255.jpg




My 'Build":

- Griffin Armament Flash-Comp with Gen 1 Blast Diffuser
- Magpul VFG on a KRG QD MLOC Rail section
- Streamlight TLR-1 HL w/ Strobe
- Magpul Gen 3 PMag
- Trigger-Tech 3.5lb AR15 Trigger
- Magpul Pistol Grip
- Generic Polymer BUIS
- B5 SOPMOD Buttstock
- Optional Lockhart Tactical Parts - Extended Take-Down Pins (x2), Left Side Receiver Charging Slot Cover, Brass Casing Deflector
- Trijicon Accupower 1-8X in American Defence QD Cantilever Mount
 
Looks nice. I've been tempted to grab one of the builder kits for a build with m16a1 parts I've had kicking around for a while, think I'll hold out for their new gen3 uppers to drop before I do. Eliminates the side charging but comes with a dust cover & brass deflector. From what I've seen so far the quality looks pretty good.
raven-upper-up_1022114933.png
 
The price can range significantly which model you buy (Gold starts at 1700-1800, and Platinum at 2000) Price for me was $2100 pre tax for the platinum model with top charging handle. But the accessory cost through Lockhart is definitely inflated. The accessories I wanted were mostly already laying around at home- minus the side cover and brass deflector (which I grabbed a 3d printed version off GP for $30). With gunflation it’s not terribly expensive given other competitors in the field (Siberian, MCR, WK180) and what you get with the Raven.
 
Good info Bartok. Looking forward to see how it shoots. Wondering what the total cost was after all the after market parts and accessories added.
 
Looks nice. I've been tempted to grab one of the builder kits for a build with m16a1 parts I've had kicking around for a while, think I'll hold out for their new gen3 uppers to drop before I do. Eliminates the side charging but comes with a dust cover & brass deflector. From what I've seen so far the quality looks pretty good.

Side charging was a benefit of this design. Too bad they abandoned it.
 
Well, it turns out that today was a bit of a mixed bag. First off, I couldn't get the rifle to self-cycle due to insufficient Gas flow, even with the Barrel and Gas Block Gas Ports drilled out to 7/64" and with the Gas Plug rotated half-ways out of the Block. It turns out that the culprit in this case may be that I did not fully drill out the gas port on the Gas Block, so some investigation is warranted there. I know for a fact that the Gas Key is tight on the Bolt Carrier, as I checked and tightened/loctited every screw on the rifle yesterday when I went over it with manual in-hand. Knowing that I will eventually get the gas flow sorted out (it is pretty basic, after all), of greater concern was an error in the Chamber Dimensions of my Barrel, resulting in bulged casings at the base of every single fired cartridge. I fired PMC XTac 55 gr, Federal Gold Medal 69 gr, and Norinco "Yelllow Box' 55 gr bulk ball ammo for a total of 80 rounds - all hand-cycled through the rifle, which was partially cycling but not picking up the next cartridge.

Accuracy was pretty much as advertised, with the "heart" of the Raven being its 5R rifled, Wylde-chambered Barrel. The Raven turned in 2 MOA 10-round groups with PMC XTac 55 gr fodder. The group size was further reduced when firing the 69 gr Federal Gold Medal Match, which turned in 5-round groups between 1 MOA (best group of the day) and 1.5 MOA. (average). Bear in mind that these were hand-cycled rounds, although I doubt that had any impact whatsoever on the groups fired for accuracy.

I emailed Lockhart Tactical using their "contact us" feature on the website and explained the situation. Quite literally within 5 minutes my phone was ringing (on a Saturday afternoon, no less), with Samuel Lockhart on the other end of the line. He was quite concerned about the situation with my new Raven and (refreshingly) made no excuses. The Out of Specification Chamber and Gas Port were a known problem with an indeterminate number of early Barrels. They continue to pop up from time to time and are especially prevalent among older "New, Old Stock" examples of the Raven. Samuel figures that they must be awfully close at this point to having all of those defective Barrels removed from circulation.

So, a disappointing day from a pure performance perspective, as my Raven did not run. That said, I have never experienced quite the same degree of excellence in Customer Service and Customer Relations as I did with Samuel Lockhart himself literally minutes after I submitted my explanatory email. So in my view, those kind of cancel each other out.... Lockhart Tactical will be shipping me a new replacement Barrel as soon as possible this coming week as I requested. I have all of the tooling necessary to swap the Barrels, so shipping me a replacement Barrel is the quickest way to get my Raven back up an running like it ought to have, right out of the box...

Here are a handful of empty casings showing the bulged area just above the Rim:



20231021-160208.jpg
d
 
....So, a disappointing day from a pure performance perspective, as my Raven did not run. That said, I have never experienced quite the same degree of excellence in Customer Service and Customer Relations as I did with Samuel Lockhart himself literally minutes after I submitted my explanatory email. So in my view, those kind of cancel each other out.... ...

Thanks for posting. Glad to hear they are keen on getting you sorted out, but it's honestly not a great sign. If they were that keen on CS, they could have applied sufficient QC to prevent the problem rifles from being distributed.

Hopefully the problem is limited in scope, time will tell.
 
Thanks for posting. Glad to hear they are keen on getting you sorted out, but it's honestly not a great sign. If they were that keen on CS, they could have applied sufficient QC to prevent the problem rifles from being distributed.

Hopefully the problem is limited in scope, time will tell.

It was a limited batch of barrels. It was identified a couple months ago and remedied for all future batches. Those affected received replacement barrels.
 
Thanks for posting. Glad to hear they are keen on getting you sorted out, but it's honestly not a great sign. If they were that keen on CS, they could have applied sufficient QC to prevent the problem rifles from being distributed.

Hopefully the problem is limited in scope, time will tell.

I really don't anticipate any problems whatsoever once the replacement barrel is installed. The rest of the rifle is incredibly well-made. Beyond that, it is a rock-solid design with 70 years of development behind it. Samuel Lockhart made the mistake of trusting a vendor to deliver in-spec Barrels. I wouldn't have thought to check each of the Gas Ports on a spec'ed Barrel before assembling and shipping complete rifles either, to be honest. That Barrel manufacturer owes Lockhart more than an apology, but that is between them and is none of my business. I am getting a new barrel free of charge, delivered to my home as quickly as possible. I really cannot ask for more. Combined with the immediate call from the owner of the company seeking to resolve the situation, that is good enough to placate me. Perhaps I'm just easy to please, but I don't see the point of being angry with Lockhart for a situation that was largely beyond his control and certainly not of his making. I am sure that he has lost plenty of sleep over the unnecessarily rocky launch of his new rifle as it is.

I cannot stress enough how impressed I am with the quality of manufacture of the Lockhart rifle. The design is quite well done also. Little design cues, lightening cuts, etc, are all flawlessly executed, adding up to a virtual work of machinist's art. You have to examine one first-hand and shoulder it to see what I am on about when I say that the light weight and perfect balance combine to make the rifle very easy and fast handling. I'd pit the Lockhart Raven against just about any other modern sporting rifle brand for quality of manufacture. Based on my preliminary accuracy results yesterday, it is going to be quite a shooter as well.

Finally, it is worth mentioning again that I chose to purchase an in-stock rifle from a small vendor and wound up with new, but old stock. That's it, that's how I wound up with a bum barrel from the initial batch of rifles manufactured. All new production rifles shipping from Lockhart's facility are 100% good to go with spec'ed Barrels. And you can bet that they are spot-checking Gas Port size nowadays as part of regular QC....
 
Last edited:
It was a limited batch of barrels. It was identified a couple months ago and remedied for all future batches. Those affected received replacement barrels.

Only time will tell. No hate here, I sincerely want this rifle to be amazing. But Lockhart does have some PR challenges to overcome, and anyone unaware of their history should look into it.

As this thread shows, apparently "those affected" will get replacement barrels if they contact the manufacturer. Maybe they could have tracked the problem rifles down before they were sold, but that's not what happened - Instead we get to hear about it on the internet.
 
Last edited:
... I wouldn't have thought to check each of the Gas Ports on a spec'ed Barrel before assembling and shipping complete rifles either, to be honest. ...

I really cannot ask for more. .... Perhaps I'm just easy to please, but I don't see the point of being angry with Lockhart for a situation that was largely beyond his control and certainly not of his making. ...

...All new production rifles shipping from Lockhart's facility are 100% good to go with spec'ed Barrels. ....


Maybe not, but you'd certainly check the specs of a large enough sample of any new product received from a new supplier.

I wouldn't be angry about it either, but this kind of thing certainly is within their control - They chose the supplier, they chose the QC process, and they chose to not recall the affected rifles. I'm not saying any of those were the wrong choices (it's not my business), but they are responsible and they get to deal with the fallout. For over $3000 I think my expectations would be higher.

Regardless, hopefully these rifles hold up.
 
Bought a builder's kit and had issues with undersized buffer tube threads. Samual suggested I use a wrench to tighten it on.
Wrench yielded another 1/2 to 3/4 turn on top of the 1-2 rotations on the threads, so that was no bueno.

Had the buffer tube threads on the lower machined to proper thread depth (thanks again CSC) only to find the buffer retainer/detent hole wasn't drilled correctly either, which I self remedied.

Rest of it went together without a hitch, but the cerecoating may have gone on a bit thick as the trigger pins were also very tight.

Aside from my issues, the machining looks decent.

I do wonder with the interface of the bolt carrier and receiver keyway and the fact it is a gas gun, a charging handle should be included with the intermediate sized build kits. I find it slightly annoying that I know have to purchase one, as using the 'plug' at the rear of the receiver isn't an option.
 
Back
Top Bottom