Looking for decent low 30mm dovetail rings

[Hitzy]

Anybody got any idea where I can source some? None of my usual shops have anything decent, just the cheap crappy lines.

 

[adamg]

CGN EE Optics Parts subforum is good, lots of ring selection at about 25% off new price.

 

[prairieguy]

Talley makes 30mm rings for 11mm dovetail. Usually in stock at Nordic marksman

 

[Poffels]

I to have been looking. Found these and am going to try them out.

https://www.airgunsource.ca/us/scope-optics/scope-mounts/

 

[grauhanen]

Sports Match makes good quality rings and Airgun Source may be the only dealer remaining in Canada. They are often used by airgunners shooting spring piston rifles with heavy double recoil because they are solid. I currently have Sports Match rings on an Anschutz rifle. Hawke makes 1" and 30mm rings that are decent too and are used by shooters looking for rings that won't slip. I've had Hawke rings on some of my rimfire rifles. They are available at D&L.

 

[.22LRGUY]

I've used BKL rings a number of times. I've gotten through D&L Airgun in BC. This link should show all the 30mm options;

https://www.bkltech.com/30mm-Scope-Mounts-s/58.htm

 

[Pneumaniatic]

Second BKL and Sportsmatch. I've bought BKL from D&L airgun and several sets of 30mm low single strap rings from Pyramid Air in the US as no dealer in Canada replied to my inquiries about that particular model. I have Sportsmatch rings on my piston air-rifles and they are solid... forgot where I bought them - D&L airgun and Airgunsource are good places to look. These 2 brands are usually my go-to's.
I have a couple sets of Talley's and they have 30mm options too - got them from Nordic and Prophet River.

 

[Hitzy]

Thanks boys, I have a 30mm with .25moa target dot I want to mount on this rig, can't complain with the fine mildot cross hairs with my first outing. Didn't have a lot of time so I focused on the barrel weight, right at the end was the sweet spot. Next time out I'll give the 1/2" at 50m a go

 

[Hitzy]

After some digging around, trial and error, found 2 steel Warne Mauser front bases in the drawer that fit perfectly. Have lots of 30mm Weaver rings so good to go now. Scope is much lower...will see how it works this weekend.

 

[Hitzy]

Like this setup much better, was on the 4th target of the 1/2"@50 test and 3rd round sounded like a half charge, sure enough hit about 2" low. Have to get some higher end RWS...bleh.