lubing with liquid alox

colt45cz75

CGN Ultra frequent flyer
Rating - 100%
147   0   0
As I am on my first foray into casting my own, I got some molds and have been experimenting. As I was trying to figure the best way to lubricate the little buggers, it hit me. I took a 2 litre coke bottle, washed it out and after it dried I tried a load of 10mm bullets. Stuffed 100 in there, squirted in some alox and after rolling them around for about 30 seconds they had a nice film of lube and no mess to deal with. I could even get 50 cal in and out no problem. You can really get the little bastards rolling in there. Anybody else try this?
 
lubing with Alox

I just did the same thing for the first time last week. The Lee Alox works well.
I just put 400 .44 mag bullets I cast in a plastic dollar store 4 liter bowl.
Just squirt a tiny amount of lube and give the bowl a swirling motion until all the bullets get covered by the gold colored lube.

Then lay it out ona cookie type sheet to dry overnight to a waxy consistency. Lee says this is all the lube their cast bulleys need
 
I just use a Sandwich Bag. Put in 100 or so, add a dollop of Alox, zip the bag closed, then shake it, squish the bullets around with your fingers from the outside, and dump them onto a piece of paper. Toss the Sandwich Bag. I stand them up to dry overnight.
 
Back
Top Bottom