M305 chop help
- Thread starter ppsh38/41
- Start date
the barrel chops for m14's are from non restricted length off 22" down to non restricted length of 18.5" the minimum length for non restricted firearms..... anything under 18.5" automatically becomes restricted...... or if by shortening you have reduced the overall length to Under the OAL for nonrestricted, regadless of barrel length.....
at least i think that's how it goes
To the OP, I have been turning down some rifle work so as to keep my work load lighter over the holidays. I will be resuming business as usual in January.
the barrel chops for m14's are from non restricted length off 22" down to non restricted length of 18.5" the minimum length for non restricted firearms..... anything under 18.5" automatically becomes prohib...... or if by shortening you have reduced the overall length to Under the OAL for nonrestricted, regadless of barrel length.....
at least i think that's how it goes
To the OP, I have been turning down some rifle work so as to keep my work load lighter over the holidays. I will be resuming business as usual in January.
fixed it..
ive been thinking about this barrel project too. does everyone kinda offer the same price?
with the barrel chop, flash hider and sights and tax its like $475, (thats based on the valleygunsmithing site)...which seems like a new rifle (pretty much is a new rifle though
)fixed it..
ive been thinking about this barrel project too. does everyone kinda offer the same price?
with the barrel chop, flash hider and sights and tax its like $475, (thats based on the valleygunsmithing site)...which seems like a new rifle (pretty much is a new rifle though
I will still welcome inquiries on quotes via email.
If you click the link below you will see a basic break down of what my Accurized Shorty work entails and you can get an idea of what individual procedures will cost you. I stock NM oprod spring guide rods, can supply the NEA mag releases and soon bolt stops, I stock Dlask 1/2 x 28 muzzle devices, and can source most canadian made m14 parts like front sights ect. I do specialize in complete rifle "packages" but folks can pick and chose from my advertised prices for the work they want done. I'll be resuming my normal bookings as of the new year.
Definition of a Prohibited FirearmThe Criminal Code states that a prohibited firearm is:
•a handgun with a barrel length of 105 mm or less;
•a handgun designed or adapted to discharge 25 or 32 calibre ammunition;
•a rifle or shotgun that has been altered to make it less than 660 mm (26 inches) in overall length;
•a rifle or shotgun that has been altered to make the barrel length less than 457 mm (18 inches) where the overall firearm length is 660 mm (26 inches) or more;
•an automatic firearm and a converted automatic firearm;
•any firearm prescribed as prohibited.
•a handgun with a barrel length of 105 mm or less;
•a handgun designed or adapted to discharge 25 or 32 calibre ammunition;
•a rifle or shotgun that has been altered to make it less than 660 mm (26 inches) in overall length;
•a rifle or shotgun that has been altered to make the barrel length less than 457 mm (18 inches) where the overall firearm length is 660 mm (26 inches) or more;
•an automatic firearm and a converted automatic firearm;
•any firearm prescribed as prohibited.
