Well I found its load after fighting with it last two range sessions
D 166
43.5 varget
C I primer
Lapua brass
I’ve mic them out @.309
I believe my . 311 projectiles are too big around for the boar on this rifle. I’m also curious to see how 308 projectiles will work
I’m going to do more advanced testing between 43 to 44 grains of powder and .1 increment increases to further test and develop a load for this rifle
Believe it or not this rifle has seven shims in the back and six in the front and one on the left-hand side of the recoil lug the most roomy stock I’ve ever seen and I’ve had four of these things
Target is at 100 m the flyer was on me and I can live with it. Five shot group.
D 166
43.5 varget
C I primer
Lapua brass
I’ve mic them out @.309
I believe my . 311 projectiles are too big around for the boar on this rifle. I’m also curious to see how 308 projectiles will work
I’m going to do more advanced testing between 43 to 44 grains of powder and .1 increment increases to further test and develop a load for this rifle
Believe it or not this rifle has seven shims in the back and six in the front and one on the left-hand side of the recoil lug the most roomy stock I’ve ever seen and I’ve had four of these things
Target is at 100 m the flyer was on me and I can live with it. Five shot group.
