M95m

[BOHROK]

I recently acquired a M95M it shoots well but has a small feeding issue, when five rounds are loaded the first two bullets run into the feed ramp instead of ramping up. After the first two rounds are out of the way the last three feed without any issue. Does anyone know what causes this or how to fix it? I quite enjoy the rifle and it shoots well I would like to have it working perfectly. Thanks for any help or advise.

 

[diopter]

Suggest looking at the extractor to see if it catches the rims as rounds are pushed out of the magazine.

 

[gordonlbyrne]

rounds may be to tight in the mag ,the follower spring may be to strong ?

 

[BOHROK]

The follower spring doesn't seem to be any tighter than any of my Mausers or Enfields. Is there a way to adjust the follower angle? Maybe give the rounds a little more angle.

 

[sail32]

I'm shure you have tried Googling " shooting the M95M ", lots of hits.

 

[BOHROK]

I have , it’s always about broken extractors and missing clips. Beyond that there seems to be very little information on using these things, just history.

 

[gordonlbyrne]

well if it feeds the last 3 rounds then it seem to indicate that the mag is to full when there is 5 rounds. so the spring may be to strong.

 

[diopter]

BOHROK
Does you have the metal clip spacer at the back of the magazine?

 

[diopter]

Does your follower look like this?
https://www.gunpartscorp.com/products/1036370

 

[BOHROK]

Yes it does look like that, but do you have a pick of this small metal clip spacer?

 

[diopter]

Not that I can find.
This might give you some ideas:
https://www.youtube.com/watch?v=cml7Fej90H4

https://www.milsurps.com/showthread.php?t=56758&p=363438