Magazine couplers for XCR 7.62x39 10 Rnd pistol mgs

[Dan856]

Hey all,

Which couplers work for these-where are they availiable?

Thanks in advance!

 

[MagWedge Industries]

http://magwedge.com/products/magwedges/ar15-magwedge-type-2/

See also our list of dealers on our website.

 

[X2guy]

Do the angled ones work with the xcr mags?

 

[MagWedge Industries]

Do the angled ones work with the xcr mags?

These ones work with the 223 and 7.62x39 mags

I am picking up the magwedge couplers for the xcr in 308 this morning. They are a little larger and will cost slightly more than the ones pictured above.

I will post a photo later today and get it on the web site ... I have a feeling there are a few xcr owners who have been waiting for this moment and now the time has come.

 

[MagWedge Industries]

Ok, it looks as if I was a little early in announcing the 308 XCR wedges ... look for them to be ready in about a week's time.

 

[X2guy]

Just placed an order for 2

 

[MagWedge Industries]

Just placed an order for 2

If you are who I think you are you placed an order for the triangle shaped wedges. They are not the same as the ones in the pic above.

Take a careful look at your mags and the pics of the different types on the website and let me know if you need to change your order.

 

[X2guy]

Hmmm...now that I looked closer my xcr 7.62 pistol mags have an angled bottom. Using the angled wedge would give a really weird look. I'm pretty sure I saw that someone used the angled wedge and modified it slightly to install it the opposite way. Gave a nice bend between the 2 mags. Will let you know. Thanks

 

[Dan856]

X2guy your right the XCR mags do have definite angle to the bottom-would like to know more/if any other products are out there specifically for the xcr mags

 

[MagWedge Industries]

X2guy your right the XCR mags do have definite angle to the bottom-would like to know more/if any other products are out there specifically for the xcr mags

Look at the pic I posted above, the coupler in that pic is a type 2 AR coupler and is designed to suit that type of magazine.

 

[X2guy]

What I'm trying to accomplish is to get an angle between the two mags. With the type 2 coupler could I couple them in the way I have pictured?

[/URL][/IMG]

 

[X2guy]

I've ordered the Type 2 as pictured above. My hope is with little tweaking I can couple the mags in order to get the angle I want.

 

[X2guy]

Got my xcr mags coupled today. only needed a slight modification with the dremel to get them to fit this way. I like this look better than when they are coupled in a straight line.

[/URL][/IMG]