Mauser 71/84
- Thread starter Mauserman
- Start date
- Location
- Tucson, Arizona
A quickie for removing the bolt.
Loosen the screw on top of the bolt until the washer is free of the reciever. (screw will not come ALL the way out.)
Move magazine selector about halfway back and withdraw bolt. (You may have to play about a bit with the positioning.
I wouldn't recommend any further disassembbly as the magazine tube will likely be rusted in place. (it has to move forward to clear the reciever opening.) If you are going to try that, removing the sprihg and follower first is a given
Loosen the screw on top of the bolt until the washer is free of the reciever. (screw will not come ALL the way out.)
Move magazine selector about halfway back and withdraw bolt. (You may have to play about a bit with the positioning.
I wouldn't recommend any further disassembbly as the magazine tube will likely be rusted in place. (it has to move forward to clear the reciever opening.) If you are going to try that, removing the sprihg and follower first is a given
