MCS Pachmyer Vindicator Pistol Grip

badboybeeson

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97.2%
611   18   5
Location
East ontario
Let's see who's paying attention today ;)

Screenshot_20240501_184719_Outlook.jpg
https://ine.soundestlink.com/ce/v/6...6a7b941e63bf6ff3bddfa418bdf78806fa6ee75ba7aa3

MCS Pistol Grip

We have 5 fully finished and ready to ship! Production has started on these.... Looking at 2-3 weeks! This listing is for preorders and that is what you will see when ordering. First 5 preorders will be filled with the stock we have. Everything ordered after that will be a preorder. This is an Remington type S&J Hardware MCS Pachmyer Vindicator grip. Compatible with all S&J Hardware MCS components. To install this, you must have our receiver plate and nut both sold seperately. Finished in black Cerakote.
 

Attachments

  • Screenshot_20240501_184719_Outlook.jpg
    Screenshot_20240501_184719_Outlook.jpg
    58.2 KB · Views: 980
Well those went frustratingly fast (I didn't manage to get one). :D

Well done guys, been looking forward to these.

Is there a certain number needed for the pre-order and how many do you think will be available (the price still the same)? Any plans to make the MCS Speedfeed stock as well?
 
acog123 said:
Well those went frustratingly fast (I didn't manage to get one). :D

Well done guys, been looking forward to these.

Is there a certain number needed for the pre-order and how many do you think will be available (the price still the same)? Any plans to make the MCS Speedfeed stock as well?
Click to expand...
They sold out in moments.
Next full run will be 200 PC.

The speed feed stocks we have the last production for the MCS before they went bankrupt.
But only some of the parts so it's work in process
 

Attachments

  • 1000004874.jpg
    1000004874.jpg
    61.4 KB · Views: 947
I see the pre-order page just went up, I'll be ordering. Again nice job guys, they look amazing. I'm sure a fair bit of reverse engineering went into it.

They'll sell well (especially in the States considering original ones go for 400-500 US if you can find them)
 
FEEDMEMORE said:
Wait what am I missing why is this 400$? Isn't the grip still sold by lymans for 75usd?
Click to expand...

It's not the standard bolt on grip, it's a reproduction of the now unobtainable MCS grip, it uses a special rail mounted on the rear of the receiver, a crosspin locks it in place. It's part of a larger system of tooless interchangeable parts
 
Fyn said:
It's not the standard bolt on grip, it's a reproduction of the now unobtainable MCS grip, it uses a special rail mounted on the rear of the receiver, a crosspin locks it in place. It's part of a larger system of tooless interchangeable parts
Click to expand...

To be honest, the current price seems quite generous.
-The grip delivered to Canada has to be over $100 at S&J's cost.
-Machining of the plate and pin has to be another $100+ (multiple pieces and the main receiver is not a simple machine process).
-Add in cerekote costs, shipping costs, and labour for cerekote prep/ pickup/ delivery, modifying of grip, assembly, Q/C, and then packaging it has to be another $100+

That doesn't account for the development costs + business overhead + government theft, let alone a profit margin.

I'm just glad S&J brought these to market. I'm sure I will be picking up another pistol grip + a full length stock once available
 
tjoke said:
To be honest, the current price seems quite generous.
-The grip delivered to Canada has to be over $100 at S&J's cost.
-Machining of the plate and pin has to be another $100+ (multiple pieces and the main receiver is not a simple machine process).
-Add in cerekote costs, shipping costs, and labour for cerekote prep/ pickup/ delivery, modifying of grip, assembly, Q/C, and then packaging it has to be another $100+

That doesn't account for the development costs + business overhead + government theft, let alone a profit margin.

I'm just glad S&J brought these to market. I'm sure I will be picking up another pistol grip + a full length stock once available
Click to expand...


it seems like you get it, we have had this project on and off for the last few years, i,m just hoping we can get it into full production before we go bankrupt LOL.

To say business is bad is and under statement..

If it were not for our US sales we would be gone already.
bbb
 
Fyn said:
It's not the standard bolt on grip, it's a reproduction of the now unobtainable MCS grip, it uses a special rail mounted on the rear of the receiver, a crosspin locks it in place. It's part of a larger system of tooless interchangeable parts
Click to expand...

100% correct
 
badboybeeson said:
100% correct
Click to expand...

Glad to see this project coming along. Had a Dlask shorty setup with an MCS plate, loved it and kind of regret selling it.

I know you originally mentioned possibly rigging up Magpul stocks, any other options planned? Would be cool to have a raptor grip option for 14" setups
 
Fyn said:
Glad to see this project coming along. Had a Dlask shorty setup with an MCS plate, loved it and kind of regret selling it.

I know you originally mentioned possibly rigging up Magpul stocks, any other options planned? Would be cool to have a raptor grip option for 14" setups
Click to expand...
Magpul stock will happen.

Other stocks are in the works.
The shockwave/ Raptor grip is in process.

But again one of the reasons these projects have taken so long is due to lack of funds and time.
Right now ìts swim or sink times in the gun biz.
 
badboybeeson said:
Magpul stock will happen.

Other stocks are in the works.
The shockwave/ Raptor grip is in process.

But again one of the reasons these projects have taken so long is due to lack of funds and time.
Right now ìts swim or sink times in the gun biz.
Click to expand...

Woah I think that would be a huge hit, I know I will be the first to buy one. Being able to quickly switch from the raptor grip to a magpul sga stock on my tac 14 would be fantastic!
 
You must log in or register to reply here.
Back
Top Bottom