Milling Promo!

[Black Box Customs]

For the next 30 days (February 14th to March 15th, 2022) Black Box Customs is offering a Counter-Inflation promotion! Right now you’ll receive 30% off of all our established pistol slide milling! If you’ve been on the fence about getting milling work done on your pistol slide, now is the time to get it done! Head over to our website, email or call us for more details, but it's as simple as that.

Glock Build Guide

www.BlackBoxCustoms.com

 

[bdb.hunting]

such a good deal!!!

 

[Bak Dur]

do you need to refinish the slide if you were to do the dragon snout milling?

 

[Shorerider]

do you need to refinish the slide if you were to do the dragon snout milling?

If they touch your slide with a milling bit you’re going to have raw exposed metal. So yeah you’ll have to refinish the slide somehow.

 

[Bak Dur]

yeah thats what i figured.

If they touch your slide with a milling bit you’re going to have raw exposed metal. So yeah you’ll have to refinish the slide somehow.

 

[BooSSted2.0]

Looking at the gallery, I see there are slide packages listed under the modifications, but I don't see those packages listed on the price page. What are the prices on those? (Trifecta, Seeker)

EDIT:

Nevermind, I see them on the build guide now.

So another question. Are the prices for a G19 Gen 4 the same as they would be for a G17?

 

[bacardi]

Are the prices and design availability the same for glock 19 gen 4?

 

[Black Box Customs]

Looking at the gallery, I see there are slide packages listed under the modifications, but I don't see those packages listed on the price page. What are the prices on those? (Trifecta, Seeker)

EDIT:

Nevermind, I see them on the build guide now.

So another question. Are the prices for a G19 Gen 4 the same as they would be for a G17?

Yes, prices for the G19,G17, G34, G48, as well as large frame variants are the same. Obviously, the design aesthetics will change slightly with a 34 versus a 48 for example due to the length of the slide, so you may get one more or one less window per side depending on which slide package you select, and so on. Nose cut can be done on 34s and 48s because they have longer dust covers, but not 17s and 19s, and only primary trigger guard undercuts are available for the 48s because the trigger guard on the 48s are so narrow, and so on, etc... just minor tweaks dependent on model, but pricing is generally the same. Hope that answers you questions!

 

[Steers]

Will this cover for an RMR cut?

 

[Black Box Customs]

Will this cover for an RMR cut?

We mill for RMRs on different platforms, if your gun is on our pre-programmed list of pistols for the RMR cut, then yes the promo would apply. ie: FN509, Glock, CZ P10, CZ Shadow2, Most 1911s with the Trijicon RMR optic mounting plate, H&K SPF9, M&P, Sig P226, Sig P320, Archon Stryk B and Stryk One. If your pistol is on that list then you're good to go.

 

[wixx]

Can you mill for a holosun 509t on an mnp9 or is it an rmr cut with an adapter plate?

 

[Black Box Customs]

Can you mill for a holosun 509t on an mnp9 or is it an rmr cut with an adapter plate?

It would be an RMR cut and then using the RMR adapter plate that comes with the 509T for an MnP.

 

[B..]

I was hoping you guy could direct mill the 509t to the M&P slide.... I've seen this before.

 

[Black Box Customs]

I was hoping you guy could direct mill the 509t to the M&P slide.... I've seen this before.

* CORRECTION * Apologizes. Yes we CAN direct mill a 509T on to M&P 1.0 and 2.0 slides.

 

[Black Box Customs]

Can you mill for a holosun 509t on an mnp9 or is it an rmr cut with an adapter plate?

I double checked with the shop, we CAN direct mill the 509T on to the M&P 1.0 and 2.0 slide. Sorry for the confusion.