Modifying MDT AICS Mag Lips

Slug870

CGN frequent flyer
Rating - 100%
168   0   0
Location
ON
Long story short, I need to modify the lips on an MDT AICS 300WM magazine to use with long 6.5x55 Swede hand loads. Having never done this before, I’m looking for any advice on best method, as well as any lessons learned from those who do/have done it.

Currently using a .338LM AICS mag that was modified for me prior to me receiving it.

Thank you.
 
I did not “change caliber “ but tweaked one of my MDT mags using a piece of 1x2 steel tubing with a zip cut slot in it. I had one mag nose diving and got it solved.
 
I have not needed to adjust a magazine but when I need to make some bends in some thin metal I usually use an adjustable wrench (crescent wrench)
 
Back
Top Bottom