Winchester-1897
CGN Ultra frequent flyer
- Location
- Newmarket,Ontario
Having trouble getting the bolt out, does anyone have a manual I could download or info for a dummy like me that would assist ?
Mohawk 600 222
- Thread starter Winchester-1897
- Start date
I have a 600 .308. It's probably the same.
You will nees : Get a small (precision screwdriver) flathead
Looking at the back of the bolt. (Pull the bolt back). On the bootom left inside the housing (kind of between the bolt and the housing), there should be a little button (release mechanism). Will a small precision screwdriver, depress that little release and pull the bolt out.
Let me know if you get it out..
You will nees : Get a small (precision screwdriver) flathead
Looking at the back of the bolt. (Pull the bolt back). On the bootom left inside the housing (kind of between the bolt and the housing), there should be a little button (release mechanism). Will a small precision screwdriver, depress that little release and pull the bolt out.
Let me know if you get it out..
Winchester-1897
CGN Ultra frequent flyer
- Location
- Newmarket,Ontario
44fordy said:
I couldn't locate a button anywhere. Maybe the 222 is a little different than the 308, thanks anyway.
All 600's are the same, trust me! There is not actually a button, but rather a lever. It is located at the bottom of the left bolt lug channel at the rear. You have to reach in about 2cm to push down on the front of the release lever as you pull back gently on the bolt. (I always use a small dimension allen wrench) It will slide right out when you get it right. Regards, Eagleye.
Last edited:
Eagle eye is correct, look at the bolt from the rear as you pull it back, there will be a small lever inside the receiver on the LH side. Press that down (relative to the receiver) and the bolt will come right out. - dan
