hey guys i have a mosberg 535 that i want to change the safety on to a large buttom saftey .but the screw that holds the saftey on is not a normal head it has two littel ears or tabs that can only be turned one way how do i get it out thanks for now DUTCH
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
mos 535 saftey
- Thread starter dutchhunter
- Start date
- Location
- Near Coldwater, Ont
I have been able to get them out with a flat blade screwdriver while applying a lot of downward force. You want a screwdriver in good shape (one that hasn't been used as a scraper or a chisel) and be very careful, a slip while applying downward force can do some serious damage to the stock or your hand. You should also be aware that there is a very tiny spring loaded detent ball under the safety button, really easy to lose this if you aren't expecting it.
Jim
Jim
- Location
- Cumberland County, Nova Scotia
+1 on really sharp screw driver. I replaced the cheap plastic safety with an identically cast metal one off of a 395 bolt gun and used a hex head screw of same thread size instead of the one way screw when I put it back together.
DO NOT LOSE the spring and ball under there when the safety slide comes loose...
DO NOT LOSE the spring and ball under there when the safety slide comes loose...
