MOSSBERG 151M(b) Info/Opinions
- Thread starter BIGHUNT
- Start date
I have an old 46bb been fooling around with. I find winchester t22 really good but with a few dudes now and then, I shoot federal gameshok 710 which shoot really good out of my cz also. Available at canadian tire if they have stock, 4 bucks a box.
- Location
- Winnipeg,Man.
my model 51 and 2- 151s like the winchester 333ammo. The Dynapoints work also but I found that they did not have the knock down hit that I like to see when gopher hunting. For the range, dynas work ok but try several solid point manufacturers and see which you particular gun likes. I use 333s both range and fields as the gun's scopes are sighted for that brand.
Cleaning the bolt actins will be a great idea after 500 rounds. The residue does build up and affects the firing pins mainly. very easy to disassemble and clean, accurate to a "T" up to 100 yards. i can attest to that as many hours this summer were spent shooting either one Mossy or another, as well as my Marlin 81s.. daily count was about 700+ between myself and my son.
Cleaning the bolt actins will be a great idea after 500 rounds. The residue does build up and affects the firing pins mainly. very easy to disassemble and clean, accurate to a "T" up to 100 yards. i can attest to that as many hours this summer were spent shooting either one Mossy or another, as well as my Marlin 81s.. daily count was about 700+ between myself and my son.
I have a 151M (a)
About the only thing it doesnt like was win dyna (lots of misfires), and remmy (super dirty ammo). Other then that it pretty much worked with any ammo. Sometimes stingers would hang up on ejection as the case is longer on the stingers.
Here are some good sources of info for you:
http://www.rimfirecentral.com/forums/forumdisplay.php?f=51
http://home.epix.net/~damguy/
About the only thing it doesnt like was win dyna (lots of misfires), and remmy (super dirty ammo). Other then that it pretty much worked with any ammo. Sometimes stingers would hang up on ejection as the case is longer on the stingers.
Here are some good sources of info for you:
http://www.rimfirecentral.com/forums/forumdisplay.php?f=51
http://home.epix.net/~damguy/
Hey there sigma1, I have a 4bb as well, do you find that with certain types if ammo (federal bulk copper plated hp for example) tend not to load right where the round doesn't seem to go up high enough in the bolt so it doesn't engage breach properly and jams. I ran through a few boxes of different types and manufacturers and found some work better than others. am I the only one with this issue? maybe i will give the t22's a try but i am wondering if loading hollow points are the problem.
