Mossberg 195KA bolt disassembly

[Warlock40]

I have a question about how to remove the sear pin.
I can take some pictures if needed

http://www.box54.com/ex-model-195KA-195D.jpg


Its part 937. Looks like a compression fit but im not sure how to get it out or which way it should go.

Any assistance would be great

Thanks

 

[Fozy]

Welcome to CGN btw

 

[Lodi]

IIRC the Sear Pin placement can be critical and the factory warned about it's removal.

I have not had one apart in quite a few years and can't picture it's position in the firearm, sorry, wish I could be more help.

 

[Warlock40]

Roger.. thanks.

Here are some pictures below;

According to the exploded view from the link in the first post part 937 ("sear pin") is the piece you see protruding from the bolt and goes through the striker.

This is the bottom of the bolt. Showing the access point to the sear pin.

 

[Fozy]

Mine is the same but doesnt stick out that far

 

[Warlock40]

It needs to stick out a bit for the bolt action to reset the pin.. it glides into the groove in receiver .. I did tap at it a bit with a null punch to see if it would move but I didn't want to reef on it just in case. It did not appear to even budge.