Murom Small Pistol/Rifle Primers

[Zee705]

Has anyone used these Murom SP/SR Primers in a striker fired pistol? I'm curious about the cup hardness since I had the odd light strike with CCI in my M&P.

https://www.canadaammo.com/product/detail/box-of-1000-dominion-arms-non-corrosive-boxer-small-rifle-primers-variation/

 

[SP641]

Fired thousands in different striker fired pistol when they were branded Dominion arms, and they always went bang. But than again, the same can be said about the CCI.

 

[ted_dent]

I haven't used CCI primers in several years but I believe they are rated among the hardest of the commonly available commercial primers. Nothing wrong with them, they may just be a little harder to light up.

I have used several thousand of the Dominion primers (made by Murom) in my CZ 75 TS and I may have had one or two primer failures (can't recall exactly but nothing worse than other brands). I realize it is a hammer fired gun, not striker fired but it has a very light mainspring and the primer indents are not deep but the rounds never fail to go "BANG".

 

[tjhaile]

They work absolutely fine in my M&P.

 

[Trinimon]

Hmmm, curious about the hardness of these too. Anyone run these through a Hornady LNL AP without issues?