- Location
- In lalaland, that is Ottawa.
Here are a number of URL's from Photobucket for my Snider. I bought it on a trip along old #2 highway from an antique dealer, about 1957-58, for either $20 or $60.
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider1.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider2.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider3.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider4.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider5.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/SniderButt1.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/SniderButt2.jpg
Here are the cartridges:
http://img.photobucket.com/albums/v605/sparseoldsalt/Rounds577.jpg
The first is a brass/paper rolled, then the progression to brass and finally modern cases. The stubby round is a blank. For the first two, the nose of the bullet has an insert (?) of some kind. The bases of these minnie ball have a hard clay wedge to open the soft lead to take the rifling. The brass round is solid lead. As for the two empty cases, I bought ten years ago but they were made for boxer primers. I drilled them out to accept a shotgun patter cup and soft soldered them in.
The rifles and many wooden cased ammo (like the .450 seen for the Martini's in "Zulu") were prepositioned all Upper and Lower Canada, for the local militia units.
Sooner than later, this rifle will show up for sale.
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider1.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider2.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider3.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider4.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/Snider5.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/SniderButt1.jpg
http://img.photobucket.com/albums/v605/sparseoldsalt/SniderButt2.jpg
Here are the cartridges:
http://img.photobucket.com/albums/v605/sparseoldsalt/Rounds577.jpg
The first is a brass/paper rolled, then the progression to brass and finally modern cases. The stubby round is a blank. For the first two, the nose of the bullet has an insert (?) of some kind. The bases of these minnie ball have a hard clay wedge to open the soft lead to take the rifling. The brass round is solid lead. As for the two empty cases, I bought ten years ago but they were made for boxer primers. I drilled them out to accept a shotgun patter cup and soft soldered them in.
The rifles and many wooden cased ammo (like the .450 seen for the Martini's in "Zulu") were prepositioned all Upper and Lower Canada, for the local militia units.
Sooner than later, this rifle will show up for sale.
Last edited:


















































