My lab needs .50 browning brass, Where can I buy it now?

[unstableryan]

Hello,
I have poked around sponsors and googled. I operate a research ballistics lab and 245gr of imr4895 with a 207gr steel fsp is proving to be a little hard on brass. I thought I had more than I do.

I have a commercial firearms permit and need some .50 cases. I have primers. I found one place earlier that had 100 for $300, but I can't remember where it was.

I am getting near mach 5 with 207gr projectiles with a .50. I didn't realize I was warping the case heads that bad though. They don't fit in the case holder anymore.

Thanks,

 

[DANS40X]

Thousands of LakeCity,Hornady,W-W,Federal,PMC,PPU,Lapua on hand.

So Close,So Far

245gr of 4895 pushing a 207gr'er

Maybe some slower 4350 will allow more reloads!

 

[TargetAcquired]

Edit: not sure if links to ####### are allowed but i noticed a guy there selling a bunch of 1f stuff cheap

 

[polkey]

Epps has a bit,
https://ellwoodepps.com/magtech-25-pieces-of-50-bmg-unprimed-brass.html?___SID=S
https://ellwoodepps.com/cbc-50-bmg-brass-qty-25.html?___SID=S

 

[apu]

There is still some brass around. Good that you have a good supply of primers as they have become as common as unicorn farts.

 

[davide montini]

Mach 5...what in the heck you shooting supersized that’s all you did

 

[peterdobson]

We have new Lapua .50 BMG.

 

[alberta tactical rifle]

We still have some 1 x fired IVI and tons of CCI #35s in stock.

 

[unstableryan]

Thank you everyone.

 

[russm86]

I see you're in the Okanagan, Powder Keg in Kamloops had some on the shelf Monday.