Name this cartridge?

[Gr33zi3]

Bought a lot of ammo and this was included. Its a 30-30win parent case and a .22? Bullet. 3030 is on left, 25-35 in center.

I dont have the specs on hand but can get them in the morning
Thank you all in advance

 

[260SnowBird]

Looks too short to be a 219 Donaldson wasp, and too long to be a 22 tuba, ill have to dig through some old books, interesting,

 

[caramel]

Zipper...

 

[bearhunter]

225 Winchester

 

[caramel]

22 mcr...

 

[FannyBayR1]

That's a Hoss Cartridge or is that Cartwright??

 

[Ruger007]

I agree that the 219 wasp is close. But the case seems too long in comparison to the shoulder on the 30-30.

Neck starts on the 30-30 is at 1.550. Where as the overall for the Wasp is 1.750.

Dug through my old books. There wasn't alot of 22 Cal's based on the 30-30. The 219 Zipper is longer yet at 1.875 but has a 12° shoulder vs the Wasps 30°.

The 225 Winchester, 218 Bee, .222 Remington Rim, .22 Remington Jet Magnum and the .22 high power. All have a smaller case diameter or way longer and have different tapers all together.

.22 Fawn is alot shorter at 1.300"

I'm thinking that it is a 219 Wasp. That obviously has been formed from 30-30 and needs to be fireformed.

I like this stuff.

 

[icecold]

Doesn’t look factory to me by the photo.

 

[Johnny G1]

Some one used a piss poor set of dies to try and form it, Just my thought's as I have made 257 from 270- 30-06 brass and they looked cleaner than and not even fire formed as yet.

 

[Gr33zi3]

Doesn’t look factory to me by the photo.

Its not. Definitely poorly cut

 

[Gr33zi3]

Update

I suck at measuring and my 15$ digital calipers arent the best but

Coal 1.995
Bullet dia 221?
Case length 1.54 +/- a few thou
Neck size .240 +/- a few thou