Need #3 and #4 bolt heads for LENo4Mk1

[Brno8x57]

I have a headspace problem on my Lee Enfield No4 Mk1. It currently has a #2 bolt head on it. I have tried the logical sources (Marstar, Numrich and Springfield Sporters, Tradex) with no luck. All they seem to stock is #0 or #1 bolt heads.
Please PM me if you have a #3 or #4 bolt head you are willing to sell or if you know of a source for these.
Thanks

 

[Vimy Ridge]

#3 are hard to find. #4 don't exist AFAIK.

 

[louthepou]

Indeed, finding a No3 can take long, and cost a lot. Is the bolt matching the receiver's serial number?

 

[Vimy Ridge]

Indeed, finding a No3 can take long, and cost a lot. Is the bolt matching the receiver's serial number?

If you can't find a #3 bolthead, it may be possible to get a newer less worn #2 bolthead and a newer bolt and get the correct headspacing. From what I've read, not only does the chamber wear, so does the bolthead and bolt. Well, at least I thought I read this somewhere once. Maybe I'm just senile before my time.

Unfortunately, ebay may be the best source for a #3 bolthead if you absolutely must keep the serial numbers matching on the rifle.

That being said, make sure you measured the headspacing properly or get it checked by a gunsmith to be sure.

 

[goldidig]

It's your lucky day. I have 2 #3 bolt head s and will sell you one. $25.00 plus postage P.M.me.
Al

 

[Vimy Ridge]

If Brno doesn't take it, I will. That's a great deal. You lucked out!!!

 

[louthepou]

Al, you're one good man!

 

[303carbine]

I guess my new #3 bolthead will still have to remain in the wax paper.....

 

[Brno8x57]

It's your lucky day. I have 2 #3 bolt head s and will sell you one. $25.00 plus postage P.M.me.
Al

PM on its way soon.