Need 9mm Plated load

[RT]

Ive got sum CAN PRO 124gr copper plated bullets that I want to load with 231,anyone got a load for these?

I load my 124 fmjs at 4.3 231...not sure if thats too hot for the plated bullets or not.

 

[Paulinski]

For my 9mm AR I load them hot - 4.8 Grains of W231. For my Glock and 1911 I load 4.0 grains thats with plated 124 grain Berry's bullets.

 

[blindman]

Ive got sum CAN PRO 124gr copper plated bullets that I want to load with 231,anyone got a load for these?

I load my 124 fmjs at 4.3 231...not sure if thats too hot for the plated bullets or not.

Use lead data for these bullets. Very soft copper, I have used them, didn't like them. I now use Frontiers. Much better.

 

[medicstimpy]

Used both Berry's and Frontier in 9mm, 45 and now in .30cal rifles.

Some say lead loads. Some say FMJ loads minus about 3%. I tried lead loads and even went to the regular FMJ load although not a max load. They worked good at the FMJ loads with no troubles. If they shoot out of your gun at a light or mid FMJ load, it should be ok to keep using whatever works best.

Only haven't tried a FMJ load in .308 because I can't get the double disc powder measure to throw a load high enough without modifying it to take 3 dics or buy another type of measure.

Oops, forgot... I do them maxed out for matches and AR in 9mm and they shoot great. Can't tell the difference in groups between them and a FMJ. For these I maxed them out with 4.8gr of Titegroup with a 115gr bullet. FUN stuff. I could go lighter but why????