Need Data: .40S&W 160gr.

[gregb]

I have some Frontier 160gr RNFP coming from Marstar and I have no data in my Lee manual or on the Hodgdon reloading center.
I have Titegroup and Bullseye on hand at the moment.

If anyone has .40 S&W data for 160gr and these powders it would be greatly appreciated.

 

[Cal45]

In my Lyman book I have:

40s&w

165gr. TMJ (1.120" OAL)

Bullseye: min: 4.8gr (733fps) max: 5.4gr (825fps)

 

[Walter Hornby]

i believe that the Frontier bullets are plated so you should be using lead data not TMJ data. TMJs and FMJs require more powder then lead so if you are using that data definitely start at the bottom end.

 

[Travel240z]

I just checked all 4 of my manuals and could not find 160grain for 40 cal.

 

[gregb]

I just checked all 4 of my manuals and could not find 160grain for 40 cal.

I know, I'm beginning to second guess my decision in bullet weights.

The closest I can find so far is 155gr Lead | Bullseye 4.6 - 4.9

 

[ndb86]

i've never even heard of 160 for .40 only 155 165 and 180