Need help from owners of Brno 21h.....

[Noel]

Who sells Lynx rings in Canada?

If I recall right I got mine from P&D in Edmonton.
Red Purple Silver international is the guy who carries replacement screws for the surley CZ rings, the allen hex heads on those things really suck! For those thinking what is this kid smoking, just use the bold letters, ferget the colors.

Aha, some good news! For those nifty Czech made mounts do a search for JGS trade and fumble around, you should find the mounts.
Once you have done that contact gunxusa dot com with your part number and hopefully he can help you out. They look like a tougher mount than the Lynx to me but I have not tossed them down a scree slope yet so take that with a grain of salt.

 

[kamlooky]

Here's the set up on my old Brno.
The handle was done long before I owned it.
Not sure if these photos will help or not.

 

[A-zone]

Thanks, Noel.

I've ended up getting a ZG-47 and a 22H back in the fold (both in 7x57) so appropriate rings are in order...

If I recall right I got mine from P&D in Edmonton.
Red Purple Silver international is the guy who carries replacement screws for the surley CZ rings, the allen hex heads on those things really suck! For those thinking what is this kid smoking, just use the bold letters, ferget the colors.

Aha, some good news! For those nifty Czech made mounts do a search for JGS trade and fumble around, you should find the mounts.
Once you have done that contact gunxusa dot com with your part number and hopefully he can help you out. They look like a tougher mount than the Lynx to me but I have not tossed them down a scree slope yet so take that with a grain of salt.

 

[longbranch*]

I used a set of low Talley "Screw-Lock" rings from Prophet River on a ZG47 I no longer own. With 21/22 Brno handle you might need higher and something like a Compact Leupold or old Weaver with smaller eye piece.
Geoff

 

[mbogo3]

High CZ rings and a M8 6X German post sits on my 21 H.Still can't put Butler creek lens caps on..............Harold

 

[farshot]

JGS looks down for the moment... I really wanted to see what they had to offer.

 

[Noel]

I just sent them a note to see if they can still get them. They had several different kinds in Steel and Dural.

 

[farshot]

Thanks Noel - I can't believe I missed this supply source! Gunnutz is great for this.

 

[Noel]

Just a update here, still havent heard from JGS, but if you look at this link here this mount is very similar to what I was talking about. They must be available somewhere, just a matter of learning to read Czeck.

http://www.canadiangunnutz.com/forum/showthread.php?849085-The-All-New-557-from-Ceska-Zbrojovka

 

[Beaver Skin]

Another option is to conact Morris at Alaska Arms. I've spoken to him about his M70 style triggers for Mausers and he also makes rings for CZ rifles. Apparently he makes some that allow scope clearance on M21s.