Need help IDing pair of old bases

[yidava25]

These bases came off an old Mauser 96 if I recall correctly, I've tried Weaver/Pic style rings (which are too wide) and rimfire-style rings (too narrow). Can anyone point me towards a set of rings that will work with these? Would like to use them due to the extra height they provide rather than take an angle grinder to my bolt handle.

 

[tiriaq]

Are they 11mm? If so, Lynx was a brand marketed in Canada for use on the receiver dovetails on BRNO rifles.
Leupold made a system called "Detacho" that might fit.

 

[yidava25]

Not sure where the 11mm measurement would be but the outside-outside of the part around which the ring assembly would clamp measures 15.5mm

 

[Backcountryal]

They are possibly the same dovetail as on the early Brno's, like the Model 1, or the CZ527. From memory it was around the 14mm mark. Lynx and Hillver made excellent steel rings to fit the Model 1. And if they fit then the Tikka ones are the same size.

 

[yidava25]

Looks like there are 16mm rings for at least some Tikkas so that's probably as close as I've come yet
Thank you guys for the info

 

[cosmic]

I have an identical set on a M98 Husqvarna from Sweden. I think the rings and bases are some proprietary mount from that neck of the woods.