Need help reloading 9mm with Titegroup

[kharlingca]

Can anyone out there tell me a good load for Titegroup powder I can’t seem to find much in the way of reloading data? Like most reloader’s I am getting frontier bullets from Higginson’s. I am using 115gr CMJ and 124gr CMJ bullets and I got a good price on Titegroup powder and now have 2lbs, but can’t find any load data.

 

[WithoutWarning]

I load 124gr. HP's only, with TG.
My load is; 4.3grs. of TG. 4.4grs. is max.
A little on the high side some may say,
but it's a nice load and I like it.
Still with-in stanard pressure specs, not +P.

Velocity out of my G17 and Sig P220 is +/- 1150fps.

 

[sunray]

Hodgdon sells Titegroup. You'll find lots of data on their site. Load for the bullet weight. Who made it or what jacket it has doesn't matter.

 

[dinsdale]

Scrounged from various forums.

Frontier 124gr. Win case WSP 4.1gr. TG 1.040"COL=1080fps in my G17

3.9gr titegroup for 124fmj

I use Frontier 124gr CMJ
4.2 gr Titegroup
Fed small primers
140 power factor.

With 124 grain CMJ bullets with Titegroup powder using small pistol primers (Winchester).......
- 3.8-3.9 grains using OAL of 1.169 I had a power factor of 122-125
- 4.0-4.1 grains using OAL of 1.169 I had a power factor of 124-126
- 4.1 ish grains using OAL of 1.54 I had a power factor of 132.5

I'm using 4.1gr of Titegroup with a 124gr. Frontier FP from a G17 at 1050fps.

Try 3.2 grains of Titegroup under a 147 grn. Zero or Montana Gold hollowpoint or 3.8 grains under a 124/125. Load anywhere from 1.12-1.15 oal.

3.0 TG, Berry's 147, just makes PF - 126.9
I settled on:
3.2 TG, Berry's 147: - 129.7

Personally I am using 3.8-3.9 Gr of Unique under 147 grain Frontiers (Thanks Repete) and find them really soft to shoot.

 

[fisherking]

I use 4.2 gr of Titegroup for 124g cmj...shoots nice

 

[medicstimpy]

4.2gr with the 115gr bullet works great with Hornady FMJ's, too.

Plated seem to fly better with a hot load of 4.6gr.

BUT these load are for both an XD9 and AR. Just DON'T be blowin' up yer gun if it's not up to a hot load.

 

[Colin]

I use 4.4gr with both 125gr lead and FMJ

 

[greenhorn]

I use 4.1 gr of titegroup with 124gr frontier cmj with an OAL of 1.120".
Shoots nice out of my tanfoglio stock.

 

[lineofsight]

3.9gr with 115gr hollow point copper plated OAL 1.12" no different than Aquila factory.