Need help with scope rings

[timoram]

I'm looking for some help choosing some quality scope rings.

My setup will be;

Remington 700 XCR Tactical LR .308win
Nightforce 5.5-22x56mm MLR 0-stop
Near 25MOA base.

I want some strong rings that allow me to munt the scope as low as possible to the rifle.
The scope will not come off the rifle so I do not need any quick detach rings or anything.

Best Regards,
Tim

 

[PEI ROB]

Since you already have the scope, base and rifle, you can measure the desired height from the base to the botom of the scope. Use the manufacturer ring chart to order.
http://www.tacticalprecision.com/tsr_w_steel_30mm_DIO.htm in this, look at measurement B

 

[mikeelliot]

My favorite rings I have used are TPS and Burris Rings with inserts.

 

[gunpro]

get the nightforce, TPS or Burris extreme tactical rings.

 

[Shazam]

sounds like the Burris tactical rings are OK.. Do they hold a zero? They seem alot cheaper than the other options out there ...

 

[Cummins4x4]

since you have the near base I would go with their rings to

 

[manitou210]

Leupold PRW rings are very good

 

[clang]

since you have the near base I would go with their rings to

X2

Why not call Richard? Let him knowmwhat scope and rifle have and will set you up with the correct Near rings fro your set up. He's a great guy to deal with and his rings are worth the $$$

/cl

 

[BigUglyMan]

Near products are nice but hardly worth twice or three times the cost of some of the other brands.. TPS TSR are the hard to beat.

Buy TPS, Farrell or Nightforce. I've got Nightforce rings on both my LR rifles and a Nightforce base on one, farrell on the other. It'd be a cold day when I bought from Richard Near.