Need information Remington 597 VTR .22 fixed stock
- Thread starter Tom Croucher
- Start date
The 597 VTR is threaded like an AR-15, any receiver extension and stock that matches on it (mil-spec or commercial) will fit. However, you don't need the spring and buffer.
Usually you need to buy those separately, but some manufacturers make complete kit like ATI; which also include the buffer and spring (useless for you).
However, if you buy separately, you'll need also a castle nut and an end plate. It would also be practical to buy an AR stock wrench to tighten the castle nut.
If you were to buy from CTCSupplies:
http://ctcsupplies.ca/collections/gun-parts/products/6-position-mil-spec-buffer-tube
http://ctcsupplies.ca/products/car-stock-lock-ring-nut
http://ctcsupplies.ca/products/ar-15-receiver-end-plate
http://ctcsupplies.ca/collections/stocks/products/magpul-moe-carbine-stock-mil-spec
http://ctcsupplies.ca/products/ar-15-stock-combo-wrench
from Wolverine Supplies:
http://www.wolverinesupplies.com/details/13398/M-15-Carbine-Receiver-Extension-Tube-Milspec.aspx
http://www.wolverinesupplies.com/details/13944/Daniel-Defense-AR-15-Castle-NutLock-Nut.aspx
http://www.wolverinesupplies.com/details/12635/FAB-Defense-Tactical-Sling-Adapter.aspx
http://www.wolverinesupplies.com/de...tock-for-MOE-Milspec-AR15M16-Tubes-Black.aspx
http://www.wolverinesupplies.com/details/11221/Midwest-Industries-Stock-Wrench.aspx
FabSports has the ATI kit without a stock and has the wrench:
http://www.fabsports.ca/buffer-tube-package-milspec-p-1524.html?language=en
http://www.fabsports.ca/enhanced-ar15m4-stock-wrench-p-423.html?language=en
SFRC has the Troy complete kit:
http://www.theammosource.com/index.php?main_page=product_info&cPath=14_530_622&products_id=3638
Other sponsors should have stocks and AR parts.
FYI, you should have posted your thread under the Rimfire subforum (http://www.canadiangunnutz.com/forum/forumdisplay.php/76-Rimfire) rather than the general one.
Usually you need to buy those separately, but some manufacturers make complete kit like ATI; which also include the buffer and spring (useless for you).
However, if you buy separately, you'll need also a castle nut and an end plate. It would also be practical to buy an AR stock wrench to tighten the castle nut.
If you were to buy from CTCSupplies:
http://ctcsupplies.ca/collections/gun-parts/products/6-position-mil-spec-buffer-tube
http://ctcsupplies.ca/products/car-stock-lock-ring-nut
http://ctcsupplies.ca/products/ar-15-receiver-end-plate
http://ctcsupplies.ca/collections/stocks/products/magpul-moe-carbine-stock-mil-spec
http://ctcsupplies.ca/products/ar-15-stock-combo-wrench
from Wolverine Supplies:
http://www.wolverinesupplies.com/details/13398/M-15-Carbine-Receiver-Extension-Tube-Milspec.aspx
http://www.wolverinesupplies.com/details/13944/Daniel-Defense-AR-15-Castle-NutLock-Nut.aspx
http://www.wolverinesupplies.com/details/12635/FAB-Defense-Tactical-Sling-Adapter.aspx
http://www.wolverinesupplies.com/de...tock-for-MOE-Milspec-AR15M16-Tubes-Black.aspx
http://www.wolverinesupplies.com/details/11221/Midwest-Industries-Stock-Wrench.aspx
FabSports has the ATI kit without a stock and has the wrench:
http://www.fabsports.ca/buffer-tube-package-milspec-p-1524.html?language=en
http://www.fabsports.ca/enhanced-ar15m4-stock-wrench-p-423.html?language=en
SFRC has the Troy complete kit:
http://www.theammosource.com/index.php?main_page=product_info&cPath=14_530_622&products_id=3638
Other sponsors should have stocks and AR parts.
FYI, you should have posted your thread under the Rimfire subforum (http://www.canadiangunnutz.com/forum/forumdisplay.php/76-Rimfire) rather than the general one.
Last edited:
