Need sum

[kamlooky]

eddjewmuhkayshun……………………………..

Cutting down a stainless bawrill, what does it entail?
Chawp saw, cork screw and then?
How does one finish the cut face?
Stainless go right thru or is it just a coating?

Have it in me tete to chawp the Hawkeye down pint sized.

Pros...…..?

Cons...…?

 

[bearhunter]

Luke, stainless used for firearms barrels isn't a lot harder than the steel used in carbon steel receivers.

I've done several and it helps to have a lathe to face off and crown the muzzle. Other than that, a good hacksaw blade will take it off easily.

Why not just trade it for a Rem Mod 7?

 

[joe-nwt]

eddjewmuhkayshun……………………………..

https://www.gonaturalenglish.com/how-to-speak-english-fluently/

 

[yomomma]

Cut with a hacksaw...

This is how I do my crowns

 

[kamlooky]

Interesting video yoyomamamamas.
Thanks

Joey, nice try...……...

What's the going rate for dewn this bawrill modification?

 

[trevj]

That kit uses Neway valve seat cutters.

 

[d4dave1]

Thanks for the post yomomma. Interesting tool that would be nice to have sitting in my workshop. Order direct from the creator in the video? How much do they cost?
Dave

 

[yomomma]

Thanks for the post yomomma. Interesting tool that would be nice to have sitting in my workshop. Order direct from the creator in the video? How much do they cost?
Dave

They are not cheap...but once you have the cutter you can buy differen sized mandrels.

Yes you buy from Dave

 

[yomomma]

That kit uses Neway valve seat cutters.

Nope....they are a copy of those cutters. Valves are usually 30°-45°

 

[ronnie01]

Actually New Way made those and i believe only sell them to Manson. They do make 15 deg 0 deg 60 deg and others. What does change is the hub id to accommodate the small pilot tops.

https://www.newaymfg.com/parts/CU286

[url]https://www.newaymfg.com/parts/TWEZ
[/URL]

 

[dan belisle]

I have a set to do that I bought from brownells. Works quite well. - dan

 

[trevj]

Nope....they are a copy of those cutters. Valves are usually 30°-45°

Nope. They are an assembled kit of essentially off the shelf parts, plus some custom mandrels.

I don't have any particular hardon for an 11 degree muzzle over a 15 degree one, so like as not I'd just order a off the shelf cutter rather than waiting for them to get around to making a special for me.

Honestly, the real magic is the cutter insert itself. The rest anyone with a crappy mini lathe could make.

Feel free to believe, but all I see is someone who saw a different use for an essentially bog standard valve seat tool, and is making good markup for doing so.