New 16ga pump?

H

hank2

Regular
Rating - 0%
0   0   0
Location
Earth
Opinions please? 16ga for around the camp rabbits birds deer, clays, Just A good al round pump,,, I prefer new, i think browning has one. thanks
 
Browning will be the only one. IIRC it has been discontinued in 16 bore. Lots of used options including Ithaca 37, Winchester 12, Remington 870, Stevens 77, Mossberg 500B, Winchester 1200 and others. I own several 16 gauge pumps and I like them a lot.

Darryl
 
My daddy was a 16G fan but that was in an area where they were about as or maybe even more popular than 20s. Now, being out in the broader world, I have to notice that I've only known one local store in a city of one million that stocked 16G ammo and they went out of business, also taking all the over the shelf 28 gauge shells with them. Both 16 and 28 gauges have what are usually considered cult followings and go in an out of popularity, as I'm told, but as far as 16G goes I've never understood why a user wouldn't pick a 12 or a 20 and be able to buy shells almost everywhere. No doubt that's just me, I shoot a 12 just because it's the most popular.
 
Big Bad said:
My daddy was a 16G fan but that was in an area where they were about as or maybe even more popular than 20s. Now, being out in the broader world, I have to notice that I've only known one local store in a city of one million that stocked 16G ammo and they went out of business, also taking all the over the shelf 28 gauge shells with them. Both 16 and 28 gauges have what are usually considered cult followings and go in an out of popularity, as I'm told, but as far as 16G goes I've never understood why a user wouldn't pick a 12 or a 20 and be able to buy shells almost everywhere. No doubt that's just me, I shoot a 12 just because it's the most popular.
Click to expand...

I can get 16 and 28 ga at both of the Canadian Tire stores in Barrie. When I lived in Guelph, both Canadian Tire stores carried 16 ga. Limited selection, but always in stock.

Jim
 
New brownings can still be found. As mentioned ithaca and winchester on the 2nd market is the next option.
The mossberg 16ga 500 would be extremely rare as i dont think they ever ran in production although some prototypes were released

If you consider a double prophet river may have a huglu left in stock
 
Why don't you go to 20 ga if you think the 12 is too much .
I have an old 16 but finding ammo is difficult , not much variety and about twice the price of the 12 ga ( I have seen 1 oz 7,5 Federal for $ 22,85 / box )
Don't get me wrong , I would never sell mine but it's only sentimental attachment , and since I have it I like to take it out on a nice sunny day for a few shots but for regular use it's always the 12 ga.
 
I think I have the only Mossberg 500B (16 gauge) in Canada. I have only seen one other than mine. As for ammo I just order it by the case from a local gun shop. No issues. As mentioned Canadian Tire always has 16 bore in Federal bird shot. Contributing dealer SFRC stock Federal 16 gauge steel shot for ducks. My dealer even got me a case of Kent bismuth in from Kent Canada. If you don't mind ordering it online ammo for the 16 is no issue. The 16 is no better than any other gauge for an intended purpose it is just one I really like.

Darryl
 
Newer Browning BPS comes with 3 choke tubes (F, M, Imp), add the Skeet choke, find proper ammo, and enjoy.
I bought one 3-4 years back and it is a fine shotgun. Good excuse to go to gun shows and look for 16ga shells.
 
I seen some slugs and various shot when I am travelling for work. I like the browning bps as well. thanks for input.
 
Give in and get a 16 if you are drawn to one but I recommend finding a good used Winchester Model 12 or an Ithaca 37 rather than a new one. Even an older, used 870 in 16 is a pleasure. Lead #6 loads aren't hard to find and will do for everything upland. These old guns don't like steel shot but options are available if you are willing to seek them out. Prophet River usually has good stock of a variety of loads since you are in the west.

The 16s that are built on the smaller, 20 gauge frame is really what I prefer. To me, they offer a fantastic balance.
 
QueensHorseman said:
Give in and get a 16 if you are drawn to one but I recommend finding a good used Winchester Model 12 or an Ithaca 37 rather than a new one. Even an older, used 870 in 16 is a pleasure. Lead #6 loads aren't hard to find and will do for everything upland. These old guns don't like steel shot but options are available if you are willing to seek them out. Prophet River usually has good stock of a variety of loads since you are in the west.

The 16s that are built on the smaller, 20 gauge frame is really what I prefer. To me, they offer a fantastic balance.
Click to expand...

there seems to be a few used around, i will look alittle closer when time allows thanks
 
Model 12 16 bores can be a challenge to the new to Model 12 16 bore shooter/buyer. Early guns had 2 9 /16" chambers and have problems feeding 2 3/4" modern cartridges. The short chamber has been proven to be safe with new loads just the ejection issues remain. Euro hulls in commonly available cartridges (chedditte) which include Kent, Winchester among others are actually just over 2 3/4" long fired and often bobble late built model 12 16 bores chambered in 2 3/4". Model 12 is a great gun but can become a nightmare to a buyer who does not have a lot of experience with them. Ithaca 37 and Remington 870 are always safe bets and easy to repair if any issues ( doubtful) arise.

Darryl
 
Remington 16 gauge hulls are shorter, so they are the logical choice for a Winchester Model 12 in 16 gauge with a 2 3/4 chamber. It is good that this issue is pointed out.
 
the Ithaca M37 is still made. There may be one on the EE under the banner "Upland Special" but it could be a .12ga. Citori's come up now and again, but are a bit burdensome.

I have several M12s, which are gorgeous units. Scaled frame for a .20 ga. Look for something special, like an english stock or ribbed version.

Best,
Patrick.
 
I have a beautiful 1955 model 12 in 16 gauge and decided this year it was going to be my go to pheasant gun.It worked great and is the smoothest pump action shotgun I have ever owned ,and in 50 years that has been a few.The #6 I used were great and packing that light framed gun all day was pure pleasure.The best was running into several other groups this year with there o/u and semi and me with my plane barrel old furniture stock. One guy had never heard of a 16 gauge so I brought him up to speed. Was a good year using an old girl for what she was built for.:)
P1E7AMS.jpg
My team with 2 day success
 
I shoot several 16 ga. guns. My passion is for proper "small framed" double guns, both SxS and O/U but if i was to buy a 16 ga. pump it would be the Browning BPS. I wouldn't worry at all about the availability of shells, just stock up when you can. Its a wonderful gauge, effective, a bit more trim and balanced than a 12 and makes your hunting buddies question your sanity. All good.
 
You must log in or register to reply here.
Back
Top Bottom