No.1 mk III parts

[markd228]

looking for a complete parts kit for No.1 mkIII to make my bubba'd rifle back the way the lord made it.

any ideas where i can get everything from the butt plate to the nose cap, all the screws, swivels, sight protector, and magazine cut off?

id be most interested in getting it all from one place.


mark

 

[Steppenwolf]

Mark,

Try Springfield Sporters or Numrich Gun Parts

 

[Stewienb]

western gun parts

Right there in ed-mound-town!
I called there for a parker hale sportered stock for my no1 mk3 and they told me all they had was full wood stocks.
Im sure they got everything. they always do!

 

[Steppenwolf]

I called Western last week all they have are plastic LE stocks.

 

[Pblatzz]

Numrich Gun Parts, you can order on line, they are good to deal with. Western gun parts never gives me prices but they are good to deal with too.

Peter

 

[Gary D]

Numrich only have post war Indian DP wood for No1 mkIII*, so you know before ordering if this is not what you want.

 

[Pblatzz]

Numrich only have post war Indian DP wood for No1 mkIII*, so you know before ordering if this is not what you want.

The other source for wood WWI or WWII is Brian #### LTD @ bdlltd@bellsouth.net. But expect to pay atleast $100 for the foresotck + $25 shipping.

The stocks at Numrich are new (I am sure they have used as well and DP), the are not used. they come complete and over sized. The need to be fitted. You will need all the metal including the front hand guard cap and screws. If you need help jut PM me.

Regards

Pete

 

[Pblatzz]

I believe that Springfield Sporters had a restore package one could buy? DP marked parts?

 

[louthepou]

I believe that Springfield Sporters had a restore package one could buy? DP marked parts?

You got it. All the parts needed. Parts are soaked in cosmoline though, and wood often needs repair, but it's the way to get started, in my opinion.

 

[louthepou]

The other source for wood WWI or WWII is Brian #### LTD @ bdlltd@bellsouth.net. But expect to pay atleast $100 for the foresotck + $25 shipping.

The stocks at Numrich are new (I am sure they have used as well and DP), the are not used. they come complete and over sized. The need to be fitted. You will need all the metal including the front hand guard cap and screws. If you need help jut PM me.

Regards

Pete

Brian indeed has good quality stuff, he will take the time to fidn what you need. I'Ve dealt with him a few times now and I'm always been more than satisfied. You should see what he found for me lately, great stock for a P-14... Can't wait to get started on that project!

 

[John Sukey]

Before doing that I would go to www.skennerton.com and order the Small Arms Identification Series booklet on the No1Mk3.
The reason, the "exploded parts diagram."
If you miss one lousy screw when you order parts, you will be paying "shipping and handling" AGAIN on the bit you missed the first time around.

 

[david doyle]

and order the Small Arms Identification Series booklet on the No1Mk3

or google it and get a schematic on line free.

 

[Pblatzz]

Brian indeed has good quality stuff, he will take the time to fidn what you need. I'Ve dealt with him a few times now and I'm always been more than satisfied. You should see what he found for me lately, great stock for a P-14... Can't wait to get started on that project!

They have them back in stock at Numrich, the p-14 stocks.