I got a Norinco CQA not too long ago and it fired the first 300 rounds or so great then the last 2 times I went to range it started failing to eject and double feeding.
Not often but enough to get annoying as once and awhile they both jam in there pretty tight and are hard to remove and it bends the shells and ruins good ammo.
After some reading my best bet seems to put an O-Ring on the extractor spring, it seems to have solved this issue for a lot of people.
Does anyone have any other suggestions or know where can I find the proper #006 Mil-Spec O-ring in Canada to fit the extractor spring?
The BCM Extractor Upgrade Kits look awesome but I can't find one on any site that will ship to Canada or anything comparable that comes with the spring and o-ring.
This is my first post so I apologize if it is in the wrong area or I'm doing it wrong, let me know where to ask this and I'll repost it if necessary.
Not often but enough to get annoying as once and awhile they both jam in there pretty tight and are hard to remove and it bends the shells and ruins good ammo.
After some reading my best bet seems to put an O-Ring on the extractor spring, it seems to have solved this issue for a lot of people.
Does anyone have any other suggestions or know where can I find the proper #006 Mil-Spec O-ring in Canada to fit the extractor spring?
The BCM Extractor Upgrade Kits look awesome but I can't find one on any site that will ship to Canada or anything comparable that comes with the spring and o-ring.
This is my first post so I apologize if it is in the wrong area or I'm doing it wrong, let me know where to ask this and I'll repost it if necessary.
